Peerless PSM-UNV Data Sheet
ISSUED: 08-22-06 SHEET NO: 056-9600-1
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessmounts.com
page 1 of 4
TECHNICAL DATA SHEET -
Designed with security in mind, the PSM-UNV offers dual layers
of protection for multimedia projectors. Security fasteners secure
the projector to the mount, while the low-profile key-locking
tray protects these fasteners for an extra level of security. The
PSM-UNV features a standard adjustment screw that makes it
easy to position the projector without having to compromise or
access secure components. This sleek yet solid security tray
comes complete with the mount, extension column connector
and cable management system that keeps cords out of sight.
The PSM-UNV combines security with easy to install and use
design that is uniquely Peerless.
of protection for multimedia projectors. Security fasteners secure
the projector to the mount, while the low-profile key-locking
tray protects these fasteners for an extra level of security. The
PSM-UNV features a standard adjustment screw that makes it
easy to position the projector without having to compromise or
access secure components. This sleek yet solid security tray
comes complete with the mount, extension column connector
and cable management system that keeps cords out of sight.
The PSM-UNV combines security with easy to install and use
design that is uniquely Peerless.
Features:
• Dual-levels of security for added theft-deterrence
• Universal tray pattern accommodates most projectors
• Built-in mount aligns image with single adjustment point
• Multiple access holes for versatile cable management
• Easy projector access without compromising mount security
• Available in black, silver or white finish to match projector
or décor
• Single adjustment point for quick projector alignment
• Tilt 30° (±15°), Roll 30° (±15°), Swivel 360°
• Easy cable management access
• Ceiling plate included with mount
• Security fasteners at every connection point
• Threads directly into any ceiling plate that accepts standard
1.5" NPT schedule 40 pipe
• Hinged two-piece tray with slide-out feature enables quick
disconnect for projector maintenance
• Universal tray pattern accommodates most projectors
• Built-in mount aligns image with single adjustment point
• Multiple access holes for versatile cable management
• Easy projector access without compromising mount security
• Available in black, silver or white finish to match projector
or décor
• Single adjustment point for quick projector alignment
• Tilt 30° (±15°), Roll 30° (±15°), Swivel 360°
• Easy cable management access
• Ceiling plate included with mount
• Security fasteners at every connection point
• Threads directly into any ceiling plate that accepts standard
1.5" NPT schedule 40 pipe
• Hinged two-piece tray with slide-out feature enables quick
disconnect for projector maintenance
Dimensions:
For product dimensions, see pages 2 - 4.
R
MODEL: PSM-UNV, PSM-UNV-S, PSM-UNV-W
ARCHITECTS SPECIFICATIONS:
The projector mount shall be a Peerless Model PSM-UNV and shall be mounted where indicated on the plans. It shall feature 30° (±15°)
pitch, 30° (±15°) roll, and 360° yaw. It shall have a 50 lb load capacity. It shall have a quick release slide out bottom tray for easy removal
and installation and maintanance of the projector. It shall feature security screws. It shall be constructed of aluminum and steel finished in
black, silver, and white. The tilting mechanism is constructed of aluminum. The main body of the mount shall be 16 gage cold rolled steel
which locks into the tilting mechanism and is secured to the aluminum ball joint with a 1/4-20 x 1 1/2" long steel bolt. It shall be capable of
holding up to 50 lb at the maximum 15° roll or pitch. Installation and assembly shall be done in accordance with the instructions provided
by the manufacturer.
pitch, 30° (±15°) roll, and 360° yaw. It shall have a 50 lb load capacity. It shall have a quick release slide out bottom tray for easy removal
and installation and maintanance of the projector. It shall feature security screws. It shall be constructed of aluminum and steel finished in
black, silver, and white. The tilting mechanism is constructed of aluminum. The main body of the mount shall be 16 gage cold rolled steel
which locks into the tilting mechanism and is secured to the aluminum ball joint with a 1/4-20 x 1 1/2" long steel bolt. It shall be capable of
holding up to 50 lb at the maximum 15° roll or pitch. Installation and assembly shall be done in accordance with the instructions provided
by the manufacturer.
Accessories:
• Ceiling plates (various models available)
• Fixed and adjustable length extension columns
• Cord wrap
• Suspended ceiling kits
• Anti-vibration and stabilizer accessories
• Fixed and adjustable length extension columns
• Cord wrap
• Suspended ceiling kits
• Anti-vibration and stabilizer accessories
Universal Projector Security Mount