HLS Technology Corporation Limited D3-1 User Manual
Press the Video Button again. The camera Working Indicator and a Red Dot on the screen will stop flashing to indicate
recording has stopped
P
hoto
To take a photo:
Press the Photo Button,the camera will emit a shutter sound.
To take Burst Photos:
Verify the camera is set in Burst Photo mode,and press the Photo Button,the camera will emit shutter soundseach time a
photo is taken.
To take Time Lapse Photos:
Verify the camera is set in Time Lapse Photo mode, and press the Photo Button,the camera initiates countdown and
emits camera a shutter sound.
Tips:
*Be sure to remove the remote control battery and put it in a safe and reliable place , if do not use for a long time.
*The remote control will always be in standby state. If the indicator is not on, the battery was out of power. In order to
confirm the normal use of the remote control, please replace the remote control battery regularly and in time as
following steps:
1. Remove the four screws and the cover;
2. Remove the battery and insert a new CR2032 battery flat side up.
3. Fixed four screws and the cover
also delete the LIVE DV APP/APK from your phone and re-download and re-install it.