SHENZHEN EAZYLIFT TECHNOLOGY CO. LTD. EC5020BA User Manual
User manual
Function specification
1. Auto standby: if there is no input signal in 5s, the system will enter into standby
status.
2. Low voltage alarm: if the voltage is less than 4.5V, when the user press lock key
or unlock key, it will sound blares first, then open or close the lock.
3. Power supply: DC/6V 4 x AA battery
4. Support the transmitter to open the lock
5. Support setting password to open the lock
6. Support the key to open the lock
7. Buzzer remind
4. Support the transmitter to open the lock
5. Support setting password to open the lock
6. Support the key to open the lock
7. Buzzer remind
Sound Status
meaning
One short beep
Key sound
One long beep
Enter changing password status, change password
succeed, transmit coding, password recovery
succeed, transmit coding, password recovery
Five short beeps
Wrong password, Change password mistake
One bass blare
Low voltage alarm
Transmitter unlock/lock specification
1. Set the power switch to “NO”, then press the learning button “FOB learn”, the
buzzer sounds slow ticks, if press till 5s, the buzzer sounds one long tick and go
back to standby status, all the stored transmitters are deleted.
back to standby status, all the stored transmitters are deleted.
2. If release the button in 5s, the buzzer does not sound, it enters into transmitter
learning status, press the open key on the transmitter, the buzzer sounds a long tick
and go back to standby status, it means learning succeed. If you want to learn
another transmitter, do that again. If do not learning any transmitter or learning
failure in 10s, the buzzer sounds quickly ticks and goes back to standby status.
and go back to standby status, it means learning succeed. If you want to learn
another transmitter, do that again. If do not learning any transmitter or learning
failure in 10s, the buzzer sounds quickly ticks and goes back to standby status.
3. It can at most store 20pcs transmitters.
4. After learnt, press the lock key on the transmitter, the door will lock; press the
unlock key on the transmitter, the door will unlock.
Setting password lock/unlock specification
1. Normal use
Setting password lock/unlock specification
1. Normal use
Unock: enter password and press unlock key, if right password, it will one long
beep and unlock; if wrong password, it will five short beeps.
Lock: enter password and press lock key, if right password, it will one long beep
and lock; if wrong password, it will five short beeps.
Specification
(1).If do not press unlock key or lock key in 5s after entered the password, it