Furrion Ltd DV1230 User Manual

9

1.  Choose a mounting location away from humid areas, water sources, appliances or any 

equipment that can radiate heat.

2.  Select an area on a wall or cabinet which is free from cable, fuel or brake lines.  

Ensure the area behind the wall mount stereo has a vent hole or if it is an enclosed box,  

it has adequate room around the rear of the unit for cooling.

3.  Ensure when the stereo is mounted in the cut out so that the wires at the rear of the unit are 

not pressed against the heat sink.

1.  Before installing the unit, connect the wiring temporarily and make sure the unit and the 

system work properly.

2.  Fix the unit with screws according to the following diagram.

 

● Remove the plastic shell from the front panels from the unit.

 

● Fix the unit with 4 pieces of #8 pan head self tapping screws.

 

● Put back plastic shell on the front panel of the unit.