NINGBO CSTAR IMP&EXP CO. LTD 0043 User Manual

SR06- iTAG User Manual

The tiny iTag is a Bluetooth 4.0 tracker. It can find your 

valuable belongings quickly using your smart phone with 

APP “iSearching”. Through the app, the device can find 

your belongings, find your phone, drop a pin on a map 

of navigation, and be used as a selfie remote and voice 

recorder. 

The iTag has a range of approximately 75 feet from your 

bluetooth enable device. 

Get the free app on Google Play Store or App Store 

Switch on: Press and hold the button of the iTag for 3 

seconds until the unit beeps twice. 

Switch off: Press and hold the button of iTag for 3 

seconds until the unit beeps once. 

1. Turn on the Bluetooth device on smart phone. 

2. Click the button “       ” on iSearching to find iTagdevices. 

3. iTag will automatically connect to the smart phone. If the App 

shows “disconnected”, please click “Connect”button again.

(Note: Click the arrow icon will run to submenu for edit; such  as 

adding photo for iTag, rename and set the ring tone etc.) 

4. To remove the item from the device list; simply slide the 

item to left. 

On the “Setting”interface,switch on “ No Disturbing  ”. The alert 

function of all devices will be shut down.

1. Click the “Alert” button on the App to trigger the alert. 

2. To stop the alert, click the button on iTag; or click “stop alert”

on the App.

43mm

35

m

m

172mm

1. Press the “Photograph”button, it will run to camera mode.

2. Press top left and right icon to change the flashlight and 

camera mode:

3. Press the setting button “       ” under photography to set up 

the  burst  shooting  and  interval  timer.  Press  the  button  on  the 

iTag to cintrol the smart phone and take the photo.

Location list: 

1.After parking your car, press the button on iTag to mark 

your current location on the map.

2.Press “Location list” and you will find where your car is 

with easy tracking.

APP Passcode setting: to set up a password. 

Map switch:to choose Google map or Baidu map. 

Double click setting:setting for alarm or voice recording 

Record History:
1.When you select “voice recording” under “Double clock 
setting”, double click iTag to record the voice. 
2.To listen the recorded voice, go to “record history” and  
select the file
3.To  delete  the  recorded  voice,  scroll  left  the  list.  Press  the 

play button to play/pause and scroll left the list to delete it.

Version:Version of current App

Battery replacement

iTag uses a CR2032 Lithium Battery. 

Lost history: 

1.If the iTag is lost, a pin-drop will be marked automatically 

on Map to tell you the site it was lost, just press “lost history”

to find the record.

Remark: To delete the list, just scroll left the list and press 

the “Delete”menu.