ONKYO TX-8030 TX-8030 B Leaflet
Product codes
TX-8030 B
TX-8030
STEREO RECEIVER
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. WRAT is a trademark of Onkyo Corporation. All other trademarks and registered trademarks are the property of their respective holders.
N
P
R
N
o
.
1
1
N
3
5
0
3
/
1
1
WRAT (Wide Range Amplifier Technology)
The TX-8030 employs a host of proprietary Onkyo
technologies to ensure optimal audio performance.
technologies to ensure optimal audio performance.
Low Negative-Feedback Design
Too much NFB makes a system susceptible to counter-electromotive
force from the speakers, resulting in a drop in perceived sound
quality. To avoid this, Onkyo focuses on improving the frequency
response and reducing distortion, without relying so much on NFB.
Closed Ground-Loop Circuits
The TX-8030 employs a sophisticated closed-circuit design in which
each circuit has a separate link to the power supply. This helps to
cancel individual circuit noise and keep the ground potential free
of distortion.
HICC (High Instantaneous-Current Capability)
HICC enables an amplifier to immediately cancel the speakers’
reflex energy and instantaneously send out the next signal. The
same high current required to achieve this also supports the
amplifier’s ability to handle speaker impedance fluctuations.
Too much NFB makes a system susceptible to counter-electromotive
force from the speakers, resulting in a drop in perceived sound
quality. To avoid this, Onkyo focuses on improving the frequency
response and reducing distortion, without relying so much on NFB.
Closed Ground-Loop Circuits
The TX-8030 employs a sophisticated closed-circuit design in which
each circuit has a separate link to the power supply. This helps to
cancel individual circuit noise and keep the ground potential free
of distortion.
HICC (High Instantaneous-Current Capability)
HICC enables an amplifier to immediately cancel the speakers’
reflex energy and instantaneously send out the next signal. The
same high current required to achieve this also supports the
amplifier’s ability to handle speaker impedance fluctuations.
Discrete Amplifier Design with Quality Parts
Unlike an amplifier design based on an integrated circuit
(IC), a discrete amplifier design incorporates individually
selected parts into the circuit board. This enables engineers
to fine-tune the amplifier circuits for optimal sound quality.
In the case of the TX-8030, the amplifier section also
incorporates a massive EI transformer and two large 8,200
µF capacitors that work to provide a stable current and
power supply.
(IC), a discrete amplifier design incorporates individually
selected parts into the circuit board. This enables engineers
to fine-tune the amplifier circuits for optimal sound quality.
In the case of the TX-8030, the amplifier section also
incorporates a massive EI transformer and two large 8,200
µF capacitors that work to provide a stable current and
power supply.
Play Your Audio Sources in Two Different Rooms
Zone 2 pre-outs on the TX-8030 allow you to send a
stereo audio signal to a second room equipped with an
amplifier and a pair of speakers. You can either enjoy the
same source in both rooms, or play a different source in
Zone 2.
stereo audio signal to a second room equipped with an
amplifier and a pair of speakers. You can either enjoy the
same source in both rooms, or play a different source in
Zone 2.
Universal Port for Single-Cable Connection of
Onkyo Peripheral Devices
Onkyo Peripheral Devices
A proprietary Universal Port located on the rear side of
the TX-8030 lets you connect an optional UP-A1 Dock for
iPod/iPhone or UP-DT1 DAB+ Radio Tuner. A key
advantage of the Universal Port is that it accepts video and
audio signals through the same cable that sends a power
supply from the receiver to the device. Net result: more
connectivity, less cable clutter.
the TX-8030 lets you connect an optional UP-A1 Dock for
iPod/iPhone or UP-DT1 DAB+ Radio Tuner. A key
advantage of the Universal Port is that it accepts video and
audio signals through the same cable that sends a power
supply from the receiver to the device. Net result: more
connectivity, less cable clutter.
SPECIFICATIONS
Amplifier Section
Power Output
Power Output
130 W + 130 W
(6
(6
Ω, 1 kHz, 1%, 1 channel driven, IEC)
Dynamic Power
180 W + 180 W (3
Ω)
160 W + 160 W (4
Ω)
100 W + 100 W (8
Ω)
THD+N (Total Harmonic Distortion + Noise)
0.08% (20 Hz–20 kHz, Half power)
Damping Factor
60 (1 kHz, 8
Ω)
Input Sensitivity and Impedance
Line
200 mV/47 k
Ω
Phono MM
2.5 mV/47 k
Ω
Rated RCA Output Level and Impedance
Rec out
200 mV/2.2 k
Ω
Maximum RCA Output Level and Impedance
Rec out
2.0 V/2.2 k
Ω
Phono Overload
60 mV (MM, 1 kHz, 0.5%)
Frequency Response
5 Hz–100 kHz (+1 dB, -3 dB)
Tone Control
±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble)
±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio
Line
106 dB (IHF-A)
Phono MM
80 dB (IHF-A)
Speaker Impedance
4
Ω–16 Ω (A or B), 8 Ω–16 Ω (A + B)
Video Section
Input Sensitivity/Output Level and Impedance
Input Sensitivity/Output Level and Impedance
1.0 Vp–p/75
Ω (Composite)
Tuner Section
Tuning Frequency Range
Tuning Frequency Range
FM
87.5 MHz–108 MHz
AM
522 kHz–1,611 kHz
530 kHz–1,710 kHz
530 kHz–1,710 kHz
General
Power Supply
Power Supply
AC 230 V~, 50 Hz
Power Consumption
278 W
Dimensions (W x H x D) 435 x 149.5 x 328 mm
Weight
Weight
8.8 kg
CARTON
Dimensions (W x H x D) 572 x 264 x 419 mm
Weight
Weight
11.3 kg
Supplied Accessories
• Indoor FM antenna • AM loop antenna • Instruction manual
• Remote controller • AAA (R03) batteries x 2
• Remote controller • AAA (R03) batteries x 2
TX-8030_EU_TX-8030 11/03/18 17:03 ページ 2