Cisco 7200 Compact Flash Disk for NPE-G1, 256 MB Option MEM-NPE-G1-FLD256= User Manual

Product codes
MEM-NPE-G1-FLD256=
Page of 20
C H A P T E R
1-1
Memory Replacement Instructions for the Network Processing Engine or Network Services Engine and Input/Output Controller
OL-8358-03
1
CompactFlash Disk, Flash Disk, and Flash 
Memory Card Information
Product Numbers: MEM-I/O-FLC16M=, MEM-I/O-FLC20M=, MEM-I/O-FLD48M=, MEM-I/O-FLD64M=, 
MEM-I/O-FLD128M=, MEM-7100-FLD48M=, MEM-7100-FLD128M=, MEM-NPE-G1-FLD64=, MEM-NPE-G1-FLD128=, 
MEM-NPE-G1-FLD256=, MEM-NPE-G2-FLD256=
This chapter describes the CompactFlash Disk, Flash Disk, and Flash Memory card options and 
specifications, as well as information regarding installation, reformatting, and copying bootable images. 
The following topics are covered in this chapter:
 
Product Description
The CompactFlash Disk slots on the NPE-G1 and NPE-G2 network processing engines for the Cisco 
7200 VXR routers, and the PC card slots on the I/O controllers and used with Cisco 7200 series routers, 
use three types of Flash memory options. The PC card slots on the I/O controllers and CompactFlash 
Disk slots on the NPE-G1 and Cisco uBR7200 series universal broadband routers also use three types of 
Flash Memory options. These options as follows:
CompactFlash Disks. CompactFlash Disks are smaller in size than Flash Disks but provide the same 
ATA interface and equivalent functionality. 
Note
Use the CompactFlash Disk only with the NPE-G1 or NPE-G2 or UBR7200-NPE-G1. Do 
not attempt to use a CompactFlash Disk in the Type 2 Flash Disk slots in an I/O controller.