Titan USA LLC TZ980 User Manual

 

 

the remote right in front of the flashlights then press any button on the remote controller until the 

flashlights LED flashes then release the button.   Reload the battery and try again if the 

modulation fails.    After modulation is done, the flashlight work status and switch will be remote 

controlled by the controller. 

                                                                 

5. Function 

(1) Flashlight in white & Green LED 

        “S1” button: Press this button to turn on and off the lights. 

        “S2” button: Press this button to blink and off the lights. 

        “S3” button: Press this button to turn on the lights by 50%. 

     Lights 100% on, Blinking, 50% brightness can be switched around the S1, S2 and S3 

buttons.    When the flashlights enter hibernation mode, the remote controller will stop functioning 

until the flashlights is awaken. 

  (2) Flashlight in red LED 

        “S1” button: Press this button to turn on and off the lights. 

        “S2” button: Press this button to increase the brightness 

Press one time to increase one level, long pressing will maximize the brightness. 

        “S3” button: Press this button to decrease the brightness. 

Press one time to decrease one level, long pressing will minimize the brightness. 

When the flashlights enter hibernation mode, the remote controller will stop functioning until the 

flashlights is awaken. 

 

6. Caution:   

      Thank you for choosing TZ-980 remote flash light, in order to enhance the duration of the 

products, please follow the below instruction: 

1.  The product must be facing right to the receiver. There shouldn’t be any barrier 

blocking in between. 

2.    Please do not dismantle the product to prevent damages to the circuit or components. 

3.    Batteries must not be thrown into fire.    Please return the batteries to public collection 

points. 

4.  To prevent the electromagnetic interference, do not use the product under such 

environment. 

7. Maintenance 

Please conduct daily maintenance after use in order to enhance the functions. 

1. Use clean and soft cloth to clean the product every time after use. 

2. Rinse the product with clean water after the products comes into contact with sea water 

or any dissolving liquid, then use a hair dryer to dry up the products. 

3. Remove the battery from the product when not in use.    Keep in 

4.    New batteries are recommended if the old batteries installed is not in use after certain 

period of time. 

8. Warranty                                                                                 

1. This product has a one year warranty.    (Damages caused by the product itself.) 

2. Any improper use which leads to the damages does not include in the warranty. 

3. Any dismantle made by user which leads to damages does not include in the warranty.