Device Ideas DF1 User Manual
DF1 Manual
Description:
DF1 is a remote sensor device measuring 3-axis accelerations and communicating data via a
wireless connection to a base station.
It is intended as a development platform for a technical user, or someone who wants to learn more
about this technology. The user can read, record, and process data produced by the device via a
wireless connection. This connection can be made though any computer which supports the
Bluetooth 4.0 protocol.
Demo applications are available and can be installed on a iOS device supporting Bluetooth 4.0.
For more information please go to: http://devicefactory.com
Warning: This device is intended for adult use only, keep out of reach of children and pets.
Contents:
DF1 device
CR2032 Battery
Operation:
Install Battery:
Place device face down on a flat surface, FCC ID should be visible
Unscrew the Philips head fastener securing the battery door with a #1 driver
Do not remove any of the other Torx fasteners
Swing battery door open
Place CR2032 battery into the battery tray with positive (+) side facing up
Swing battery door closed
Secure battery door with Philips head fastener, do not over tighten fastener
Note: If the device is not going to be used for an extended period of time, please remove the
battery.
Connecting via iOS or Android device:
Demo application will be made available App stores
Search for Device Factory for available Apps
App source code is also available at http://github.com/devicefactory
Connecting via Linux or Mac OSX: