Beijing Noitom Technology Ltd. HI5-TC-01 User Manual

Hi5 VR Glove

Developer Guidelines

NOITOM corporation

Sep.2017 V1.1

Hi5 VR Glove Developer Guidelines

Step 6: Demagnetization (see

“2.5.3 Demagnetization”)

Step 7: Calibration (see

“5. Calibration Instructions”)

2.5.2 Pairing Gloves

Each set of Hi5

HAS ALREADY BEEN PAIRED

in the factory, so normally you

DO NOT

need to pair them again and the Glove will connect to the Dongle automatically. However,

if you mix different sets of Gloves up (the indicator lights of the Gloves and Dongle remain

in breathing status), you need to re-pair the Dongle and Gloves. The method is as follows:

Step 1. Dongle:

1. Plug in the Dongle into PC:

The indicator light will start to breathe.

2. The Dongle entering pairing mode:

Press and hold the button on the Dongle for 3 seconds (release when the indicator light turns on to a

solid state): The indicator light will slowly flash (flash at 1Hz). Now the Dongle is in pairing mode and

waiting for connection with the Glove/Gloves.

Step 2. Glove:

A. Pair of Gloves:

1. Turn on both Gloves:

The indicator lights on both Gloves will start to breathe.

2. Both Gloves entering the pairing mode:

Pressing and holding the buttons of both Gloves for 3 seconds(release when the 2 indicator lights

turn on to a solid state)

：The 2 indicator lights will slowly flash (flash at 1Hz). Now the Gloves are in

pairing mode and they will connect to the Dongle automatically.

3. Now the Gloves and Dongle will enter working mode automatically (rapid flashing at

20Hz). The pairing operation for one pair of Gloves is now completed.

B. Single Glove:

1. Turn on the Glove: