Southern Telecom SVC680 User Manual
Installing Power Kit(
This part is waiting for update--from Sharetronic
)-
Powering the Doorbell
After wiring the doorbell it may take a few minutes before it powers on.
Please pay attention to that the doorbell operates on a 16-32VAC.
The LED indicator in the mid of incandescent Lamp will turn WHITE.
LED Indicator-Doorbell Status(
Please pay attention to that the doorbell operates on a 16-32VAC.
The LED indicator in the mid of incandescent Lamp will turn WHITE.
LED Indicator-Doorbell Status(
Waiting for FW update--Sharetronic
)
⚫ Solid White
Doorbell is powered on
⚫ Slowly Flashing White
Doorbell is connecting to WiFi
⚫ Quickly Flashing White
Doorbell has successfully connected and is now connecting to cloud service
⚫ Solid White
Doorbell has successfully connected to Cloud service. Then the LED would turn off after
connection.
When in night mode, once press the Dingdong button, the incandescent lamp will turn on, in this
case you could see the visitor clearly.-
Resetting the Doobell
It may be necessary or required to reset the doorbell for a number of different reasons, such as
when you are connecting to the doorbell for the first time, switching WiFi network the doorbell is
connected to, or when deleting the doorbell from an account.
To reset the camera, insert the supplied reset pin into the (Reset)hole then press and hold for
6seconds. A voice will be heard indicating that the doorbell has been successfully reset.
。
Note: When resetting the doorbell you will have to reconnect it to your WiFi network.
Connecting the Doorbell(
case you could see the visitor clearly.-
Resetting the Doobell
It may be necessary or required to reset the doorbell for a number of different reasons, such as
when you are connecting to the doorbell for the first time, switching WiFi network the doorbell is
connected to, or when deleting the doorbell from an account.
To reset the camera, insert the supplied reset pin into the (Reset)hole then press and hold for
6seconds. A voice will be heard indicating that the doorbell has been successfully reset.
。
Note: When resetting the doorbell you will have to reconnect it to your WiFi network.
Connecting the Doorbell(
Waiting for FW and APP update on it-->Sharetronic
)-
To setup and use your WiFi Camera, you will need a compatible Android or iOS device, the
HomeConnect App, and an 802.11b/g/n 2.4 Ghz Wi-Fi network.
Make sure your doorbell is powered on and the HomeConnect app is installed to your phone.
1. Reset the doorbell by inserting the supplied reset pin into the [Reset] hole then press and hold
for 6seconds until a voice is heard.