Security People Inc. dba Digilock 5GNMVXRNLSXR User Manual

 Mini RFID

Shared & Assigned Use Functionality

Product Guide

Express Register Manager Credentials

The Programming Key can quickly program multiple locks to operate with the same manager credentials. 

Go to a lock already programmed to operate with the manager credentials.

Touch and hold 

` for 10 seconds (a two-tone beep will be heard after 

5 seconds followed by 2 sets of two-tone beeps after 10 seconds) then 
release. The LED will fl ash. 

Insert the Programming Key. 

Two sets of two-tone beeps will be heard and the LED will turn off. 

Insert the Programming Key to program each lock to operate with the same 
manager credentials.  

Two sets of two-tone beeps will be heard and the LED will fl ash once 
to indicate successful programming. 

End express registration mode.*

Go to any programmed lock.

Touch 

` then insert the Programming Key.

Touch 

` then insert the Programming Key again to return the bolt to the 

original position. 

Programming Instructions 

Add Manager Credentials

Manager credentials can be programmed to the locks at any time. 

Go to a lock requiring additional 
manager credentials.

Touch and hold 

` for 5 seconds 

(a two-tone beep will be heard after 
5 seconds) then release. 

The LED will fl ash and the Reader 
will turn on. 

Insert the Programming Key. 

A two-tone beep will be heard. 

Insert each additional Manager Key 
or present each Manager RFID one 
at a time. 

A two-tone beep will be heard for each 
manager credential programmed. 

Insert the Programming Key. 

A two-tone beep will be heard and 
the LED and Reader will turn off. 

Repeat above steps for each lock 
or follow instructions to Express 
Register Manager Credentials to 
quickly program the same manager 
credentials to operate multiple locks. 

*The Programming Key will continue to function in express registration mode until it is used to operate a lock.

R F I D

CARD

Manager