Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 8    Static Route

111

Use this screen to configure the required information for an IPv6 static route. Click Add New Static 

Route or select an IPv6 static route index number and click Edit. The screen shown next appears.

Figure 73 Network Setting > Static Route > IPv6 Static Route: Add/Edit

The following table describes the labels in this screen. 

Table 37   Network Setting > Static Route > IPv6 Static Route: Add/Edit

Destination IPv6 

Address

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. If you need to specify a route to a single host, use a 

prefix length of 128 in the prefix length field to force the network number to be identical 

to the host ID.

IPv6 Prefix 

Length

Enter the address prefix to specify how many most significant bits compose the network 

address.

Gateway IPv6 

Address

Enter the IPv6 address of the gateway. The gateway is a router or switch on the same 

network segment as the device's LAN or WAN port. The gateway has a route to the 

destination network and helps forward packets to their destinations. If a link local 

address is used, the interface should also be specified.

Bound Interface

If you want to forward IPv6 packets to a bound interface, select the interface through 

which the traffic is sent.

OK

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.