Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 25    Remote Management

207

The following table describes the labels in this screen.

Table 86   Maintenance > Remote MGMT > Telnet 

Server Port

This displays the service port number for accessing the Device. If the number is grayed 

out, it is not editable.

Server Access

Select the interfaces through which a computer may access the Device using this service.

Note: It is recommended if you are allowing WAN access even temporarily to change the 

default password (in Maintenance > User Account). To allow access from the 

WAN, you will need to configure a WAN to Router firewall rule. 

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the Device 

using this service. 
Select All to allow any computer to access the Device using this service.
Choose Range to just allow the computers with an IP address in the range that you 

specify to access the Device using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

You can use FTP (File Transfer Protocol) to upload and download the Device’s firmware and 

configuration files. To use this feature, your computer must have an FTP client.

Use this screen to specify which interfaces allow FTP access and from which IP address the access 

can come. To change your Device’s FTP settings, click Maintenance > Remote MGMT > FTP. The 

screen appears as shown.

Figure 139 Maintenance > Remote MGMT > FTP