Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 25    Remote Management

210

The following table describes the labels in this screen.

Table 88   Maintenance > Remote MGMT > SNMP 

Server Port

This displays the port the SNMP agent listens on. If the number is grayed out, it is not 

editable.

Server Access 

Select the interfaces through which a computer may access the Device using this service.

Secured Client 

IP Address

A secured client is a “trusted” computer that is allowed to access the SNMP agent on the 

Device.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computers with an IP address in the range that you 

specify to access the Device using this service.

Get Community

Enter the Get Community, which is the password for the incoming Get and GetNext 

requests from the management station. The default is public and allows all requests.

Set Community

 Enter the Set community, which is the password for incoming Set requests from the 

management station. The default is public and allows all requests.

Trap 

Community

Type the trap community, which is the password sent with each trap to the SNMP 

manager. The default is public and allows all requests.

IPv4 Trap 

Destination

Type the IPv4 IP address of the station to send your SNMP traps to.

IPv6 Trap 

Destination

Type the IPv6 IP address of the station to send your SNMP traps to.

Apply

Click Apply to save your changes back to the Device. 

Cancel

Click Cancel to begin configuring this screen afresh.

 

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice 

versa.