Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 25    Remote Management

213

Click Maintenance > Remote MGMT > SSH tab to display the screen as shown. 

Figure 144 Maintenance > Remote MGMT > SSH

The following table describes the labels in this screen.

Table 91   Maintenance > Remote MGMT > SSH 

Server Port

This displays the service port number for accessing the Device. If the number is grayed 

out, it is not editable.

Server Access

Select the interfaces through which a computer may access the Device using this service.

Note: It is recommended if you are allowing WAN access even temporarily to change the 

default password (in Maintenance > User Account). To allow access from the 

WAN, you will need to configure a WAN to Router firewall rule. 

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the Device 

using this service. 
Select All to allow any computer to access the Device using this service.
Choose Range to just allow the computers with an IP address in the range that you 

specify to access the Device using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

This section shows an example using a graphical interface SSH client program to remotely access 

the device. The configuration and connection steps are similar for most SSH client programs. Refer 

to your SSH client program user’s guide.