Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 6    Wireless

54

Select No Security to allow wireless stations to communicate with the access points without any 

data encryption or authentication.



If you do not enable any wireless security on your Device, your network is accessible to any 

wireless networking device that is within range.

Figure 27 Wireless > General: No Security

MBSSID/LAN 

Isolation

Select this to keep the wireless clients in this SSID from communicating with clients in 

other SSIDs or wired LAN devices through the Device.
Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless 

clients to only connect to the Internet through the Device.

Channel Selection

Set the channel depending on your particular region.
Select a channel or use Auto to have the Device automatically determine a channel to 

use. If you are having problems with wireless interference, changing the channel may 

help. Try to use a channel that is as many channels away from any channels used by 

neighboring APs as possible. The channel number which the Device is currently using 

then displays in the Operating Channel field.

Scan

Click this button to have the Device immediately scan for and select a channel (which 

is not used by another device) whenever the device reboots or the wireless setting is 

changed.

Operating Channel

This is the channel currently being used by your AP.

Security Level

Security Mode

Select Basic or More Secure to add security on this wireless network. The wireless 

clients which want to associate to this network must have same wireless security 

settings as the Device. When you select to use a security, additional options appears 

in this screen. 
Or you can select No Security to allow any client to associate with this network 

without any data encryption or authentication.
See the following sections for more details about wireless security modes.

Apply

Click Apply to save your changes back to the Device.

Cancel

Click Cancel to restore your previously saved settings.

Table 9   Network > Wireless LAN > General (continued)