SUPERDIGITAL TECHNOLOGY CO. LIMITED W800 User Manual
21
[Note] Enable SIM1 cell broadcast to receive cell broadcast from SIM1.
SIM2 cell broadcast
Cell broadcast is the service that the network operator sends messages such as weather report and traffic to the GSM
Cell broadcast is the service that the network operator sends messages such as weather report and traffic to the GSM
subscribers in specified area.
[Receiving mode]: Enable/disable message receiving.
[Read message]: If the cell broadcast is enabled, you can read the received messages.
[Language]: Set the language of received message.
[Channel setting]: Select, add, edit or delete the channel.
[Read message]: If the cell broadcast is enabled, you can read the received messages.
[Language]: Set the language of received message.
[Channel setting]: Select, add, edit or delete the channel.
[Note] Enable SIM2 cell broadcast to receive cell broadcast from SIM2.
6.6 Multimedia
[Cameral selection]
After before may choose the use, the camera or, camera.
[Camera]
In this menu, you can take pictures with the embedded camera and adjust the camera settings. The camera lens is in the rear
side of the mobile phone and the screen is the viewfinder window. The pictures are taken in JPG format. After downloading to
PC, please view with appropriate software.
PC, please view with appropriate software.
If the mobile phone memory is insufficient, please delete certain pictures or other files in “File manager”.
The mobile phone has front/rear camera. In standby interface, slide the rear cover to open/close the rear camera.
Camera options
The mobile phone has front/rear camera. In standby interface, slide the rear cover to open/close the rear camera.
Camera options
Option
Description
Self mode
Activate/deactivate the front camera
To album:
View the saved pictures and the “+/-” on the screen are invalid.
Camera
settings
settings
Shutter tone: Sound effect I, II, III and OFF
Exposure compensation: -4 ~ +4
Avoid flicker: 50Hz (default), 60Hz
Shooting delay: 5sec, 10sec, 15sec or OFF.
Sequence setting: Single, three, five or OFF.
Shooting delay: 5sec, 10sec, 15sec or OFF.
Sequence setting: Single, three, five or OFF.
Image
setting
setting
Image size: 640*480, 320*240, 160*120, 240*180
Image quality: intermediate, high, low
White
balance
balance
Auto, sunlight, tungsten lamp, fluorescent, cloudy, and incandescent.
Scene mode
Auto, night mode
Special
effect
setting
effect
setting
Five options are available
Image frame
Two options are available and you can also disable the image frame
Storage path
Memory card
Reset
Restore the default settings
Note: After replacing the T-Flash card, it is necessary to create a Photos menu before using the camera.
Album: All the pictures are saved in Album.
Description of album options
Description of album options
Option
Description
View
View selected picture/photo
Browsing mode
Two browsing modes are available: List and Matrix.
Send
Send the selected picture/photo to wallpaper, screen saver, power on/off video or specified
path (e.g. SMS, MMS, Contacts)
path (e.g. SMS, MMS, Contacts)
Rename
Change the name of selected picture/photo
Delete
Delete the selected picture/photo
Delete all
Delete all the pictures/photos in the Album
Sort
Sort the pictures according to name, type, time or size; or select None and do not sort.