Apollo America Inc 51000355 User Manual

Page of 22
ATTENTION: This manual should be read prior to use and retained for 
further information.
GENERAL INFORMATION
The Wireless Smoke Heat Alarm is a 3xAAA battery powered wireless 
detector intended for use with a compatible wireless alarm system. The 
detector has a built-in wireless transmitter, which communicates with 
the control panel. When smoke is detected, the alarm sounds a loud 
local alarm and the built-in transmitter sends a signal to the control 
panel. The Wireless Smoke Heat Alarm contains an integrated fixed 
41°F temperature freeze sensor that will send a warning signal based on 
temperature detected. This detector is designed to provide protection 
with 70-foot spacing capability.
The detector can send alarm, tamper and battery condition messages to 
the system’s receiver. Refer to the wireless system’s instruction for the 
maximum number of transmitters that can be supported.
CONTENTS OF BOX:
•  Wireless Smoke Heat Alarm with base
•  Installation guide (APD0601)
•  Pack of screws and anchors
•  Labels or decals as appropriate
•  3 AAA PC2400 Duracell Procell batteries (1.5V 1100mAh) or 3 AAA 
Energizer E92 batteries (1.5V 1100mAh)
51000-355
Wireless Smoke Heat Alarm
Installation Guide