HEADWATERS INC. BST-100 User Manual

   June 

05, 

2013 

 

 

1.1. 

The unit must meet the specific requirements listed below as compared to documentation provided and/or 

identified and approved samples.  Documentation shall include any and all correspondence with Headwaters 

(USA) Inc., Headwaters Research & Development (Canada) Inc. regarding product specification and/or details. 

2.1. 

The unit shape details and finish must meet the approved standards as documented in the Industrial Design 

specifications.  The final version of the Industrial Design specifications shall be mutually agreed upon by The 

MANUFACTURER and HEADWATERS in writing prior to the start of tooling and production. 

2.2. 

Any deviation from the Industrial Design specifications shall require the written approval of Headwaters or its 

designated agent(s) prior to the implementation of the design. Headwaters shall not unreasonably withhold 

such approvals.  Generally such changes will be related directly to mechanical design and /or manufacturability 

requirements. 

2.3. 

All plastics shall be of the specified colors and shall not obviously deviate from the median of any sample.  The 

plastic colors will be specified using supplied samples OR the PANTONETM color specification system.  

Headwaters will provide actual plastic color samples where possible and appropriate.  The color of all molded 

parts shall be pre-approved by Headwaters prior to production. (The MANUFACTURER will supply plastic color 

proof sample for approvals when required.) 

2.4. 

Headwaters will provide custom artwork for pad / hot stamp printing and product information tool inserts for 

specific customer requirements.  A change of artwork and product color will require a minimum order of 2500 

units (one time order) and 1500 pcs. (recurring orders.) Headwaters will incur film and set up charges for any 

changes in artwork or printing method. 

2.5. 

The rights to the product Industrial Design and all related details shall remain the sole and exclusive property of 

Headwaters Research & Development (Canada) Inc.   Use of the design or any of its specific elements requires 

the written authorization of Headwaters.