Unique Broadband Systems Ltd. DRU1KW User Manual
Chapter
3
Installation
3.16 AC Power
3.16.1 General Requirements
A certified Electrician should connect the repeater to the building/site electrical service panel
to meet all local and national electrical codes, and according to the repeater electrical
to meet all local and national electrical codes, and according to the repeater electrical
drawing(s).
AC Supply Voltage: 190 – 264 VAC (208 VAC nominal), Single Phase
Frequency: 47 to 63 Hz
Power Consumption: 19.1 kVA max.
Frequency: 47 to 63 Hz
Power Consumption: 19.1 kVA max.
Verify that the AC supply voltage is within the specified range and check
all power cables for damage.
3.16.2 Repeater Cabinet Ground Connection
The repeater cabinets must be connected to the building/site’s main
ground terminal.
ground terminal.
An external ground conductor can be secured to the ground stud located on the left side of
the HB cabinet using the
the HB cabinet using the
XX nut
A torque rating of XX In. Lbs. should be
used to tighten the nut.
An external ground conductor can be secured to the ground stud located on the right side of
the LB cabinet using the
the LB cabinet using the
XX nut
– see Figure 3-42.
A torque rating of XX In. Lbs. should be
used to tighten the nut.
SX03-20000-01-M01 3-47