American Standard Brands AS1660808 User Manual
BLINK RED
M965628
ADDITIONAL FEATURES
TURN OFF THE SHOWERHEAD RING
• Press and release the power button (middle).
All lights will turn off. The showerhead ring will
automatically turn off in 2 minutes when there
is no device in range.
• Press and release the power button (middle).
All lights will turn off. The showerhead ring will
automatically turn off in 2 minutes when there
is no device in range.
LOW BATTERY INDICATOR
• The power button (middle) will start to blink red.
• The power button (middle) will start to blink red.
PRESS AND
RELEASE
INITIAL CONFIGURATION
STEP 1: TURN ON THE BLUETOOTH DEVICE
AND THE SHOWERHEAD RING
• Turn on the Bluetooth setting on your device.
• Press and release the power button (middle) until
showerhead ring beeps twice.
STEP #2: BLUETOOTH PAIRING
• The power button (middle) will start to blink (blue)
several times and volume buttons (plus and minus) will
remain constantly on (blue). Go to the Bluetooth settings
on your device and select the “Lyric” device to start the
pairing process.
NOTES:
• The showerhead ring can store a maximum of
4 Bluetooth devices.
• Adjusting the volume on your Bluetooth device and/or
showerhead ring might be necessary.
POWER BUTTON
BLINKS (BLUE)
ALL THREE ON
WHEN CONNECTED
DELETE A BLUETOOTH DEVICE FROM MEMORY
• To delete a Bluetooth device from memory, press and
hold the power button for approximately 5 seconds until
you here a single beep. This will delete the Bluetooth
device that has been used the least of time. However, if
this device is to be re-paired with the showerhead ring,
another device would need to be deleted from memory.
• To delete a Bluetooth device from memory, press and
hold the power button for approximately 5 seconds until
you here a single beep. This will delete the Bluetooth
device that has been used the least of time. However, if
this device is to be re-paired with the showerhead ring,
another device would need to be deleted from memory.
PRESS AND HOLD
ON (BLUE)