QINGDAO TRI-LINK LOCK GROUP CO. LTD WSY319 User Manual

PC: Programming Code

UI: User ID (01-50，2 digits)

UC: User Code (

-8 digits)

1. To unlock the lock

Using Keypad: Enter a valid user code and press

and hear 1 beep and lights green.

Using Remote: Press remote

button. You will hear 1 beep and see a green light.

2. To lock the lock

Using Keypad: Press

and then hear 2 beeps and lights red.

Using Remote: Press remote

button. You will hear 2 beeps and see a red light.

3. Add a new user code (You can add up to

new user codes)

PC-

-1-

UC-

-Re-enter UC-

. The lock will beep once and light green

4. Delete one existing or preset user code

PC-

-2-

Re-enter UI

.The lock will beep once and light green.

5. Delete all user codes

PC-

-3-

- Re-enter PC -

（This will delete all user codes but not the programming code.）

6. Change current or preset programming code

PC-

-4-

-New PC-

-Re-enter New PC-

7. Auto-Lock Function

PC-

-5-

- Numbers for Auto lock period (Start from 20-900 seconds, other numbers will be

invalid, if input 00, the auto-lock function will be cancelled).

8. Add a new remote controller (up to

remotes per lock)

Press the button on the back panel for 3 seconds, you will hear a short beep, and then press any

button on the remote controller to learn, if success, you will hear a short plus a long beep, if not

success, 2 short beeps.

9. Delete all remote controllers

Press the button on the back panel, after 3 seconds you will hear a short beep, do not use remote

controller to learn, keep on pressing it for another 3 seconds, you will hear a long beep. All remote

controllers are now deactivated.

(In short, press the button on back panel for more than 6 seconds,

all remote controllers will be deleted)

10. Reset programming code to the original factory settings

Remove one battery and wait 10 seconds. Reinsert the battery and wait for the long and short

beeps. Press

button 3 times within 3 seconds. The lock will beep and light green.