Prentke Romich Company ACN1000PRC User Manual
Applying a Screen Protector
If you plan to use a screen protector, apply it before attaching the device frame. If the frame is already
in place, you must remove it before applying the screen protector. If you need to remove the frame, see
“Replacing the Device Frame” on page 21.
1.
Turn your device off and lay it flat on a table.
2. Remove dust and fingerprints from the screen using a lint-free cloth dampened with water or flat-
screen TV cleaner.
3. Peel a screen protector from its backing.
4. Hold the protector along the edges with the side that was against the backing facing the screen.
5. Align one edge of the protector with one edge of the screen.
4. Hold the protector along the edges with the side that was against the backing facing the screen.
5. Align one edge of the protector with one edge of the screen.
6.
Press the protector onto the screen, adjusting the protector until it covers the screen along all
edges.
7. Use the squeegee included to smooth out the protector and remove air bubbles and wrinkles.
8. Wipe the protector with a lint-free cloth to remove any fingerprints.
Hint: Regularly wipe off the protector with a damp lint-free cloth to remove fingerprints, smudges, etc. If
the protector becomes too dirty, peel it off and replace it with a new protector.
Accent 1000 Hardware Manual
Page 14
PRELIMINARY