EMOI LIFESTYLE CO. LTD H0019 User Manual

Page of 1
• You can control the speaker either by tapping its surface downward with a 45 
  degree or shaking it slightly. 
• Note that the shaking/tapping time interval is more than 0.5 seconds.
• On/off switch for this shaking/tappking function is at the bottom.
• The sensitivity of shaking/tapping function is determined by shaking/tapping speed, 
  force and direction. Please hold the speaker firmly and shake or tap slightly. Do not 
  shake it forcefully. If you have difficulty in controlling light with this function, please 
  switch off this function and use lighting button to turn on/off the light.
• Do not hold the speaker for a long time after shaking or tapping it, which may affect 
  the speaker cooling itself.
Notes
• If crash or other abnormal occurs, please restart the product. When the lamp speaker 
  is on, put the paperclip and the alike into the bottom hole inside which the reset button 
  is, so you can reset the product to factory settings.
Restart
• This equipment has been tested and found to comply with the limits for a Class B digital 
  device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
  reasonable protection against harmful interference in a residential installation. This 
  equipment generates, uses and can radiate radio frequency energy and, if not installed 
  and used in accordance with the instructions, may cause harmful interference to radio 
  communications. However, there is no guarantee that interference will not occur in a 
  particular installation. If this equipment does cause harmful interference to radio or
  television reception, which can be determined by turning the equipment off and on, the 
  user is encouraged to try to correct the interference by one or more of the following 
  measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver 
  is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. This transmitter must not be co-located or operating in conjunction with any 
modifications not expressly approved by the party responsible for compliance could void the 
user's authority to operate the equipment. This equipment complies with Part 15 of the FCC 
Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause 
   undesired operation.
FCC Radiation Exposure Statement
 
This device complies with Industry Canada RSS-210. Operation is subject to the 
following two conditions: (1) this device may not cause interference, and (2) this device 
must accept any interference, including interference that may cause undesired 
operation of the device. The device meets the exemption from the routine evaluation 
limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can 
obtain Canadian information on RF exposure and compliance.
Canada Statement
This product is subject to European Union regulations that 
promote the re-use and recycling of used electrical and 
electronic equipment. This product required the extraction 
and use of natural resources and may contain hazardous 
substances. The symbol above, on the product or on its 
packaging, indicates that this product must not be disposed 
of with your other household waste. Instead, it is your 
responsibility to dispose of your waste equipment by 
handling it over to a designated collection point for the 
recycling of waste electrical and electronic equipment. The separate collection 
and recycling of your waste equipment at thetime of disposal will help to conserve 
natural resources and ensure that it is recycled in a manner that protects human 
health and the environment. For more information about where you can drop of your 
waste equipment for recycling, please contact your local city office, your household 
waste disposal service, or the store from which you purchased the product.
Information to Consumers in Application of EU WEEE Directive 
96/2002
ENGLISH
• A perfect combination of Bluetooth speaker and 
  mood light.
• Playing music from Bluetooth enabled devices, 
  like smart phones, tablet and computer.
• Slightly shaking or tapping the lamp to adjust 
  brightness or turn it on/off.
• App control all functions, play music, resume 
  and shutdown the speaker automatically, change 
  the light color.
• Build- in Li-polymer battery.
Thank you for choosing our product. 
Please read this manual and safety instruction before usage.
Please keep the manual for future reference.
Specifications
• Name: Smart Portable Lamp Speaker      • Item No. H0019 
• Input: DC5V 1000mA                                • LED power: 0.6W
• Speaker power: 3W                                  • Distortion: <0.5%
• Frequency range: 70HZ – 18KHZ            • Battery: 3.7V/1300mAH
• SNR: >70dB                                             • Bluetooth version: 4.0
• Speaker size: 1.5”                                    • Material: ABS +PC
• Product size: Φ75x86mm                        • Charging Time: 2-3 hours
• Weight:213g                                          
• Battery information: After fully charged, it can work up to 8 hours to play music; Work up 
  to 6 hours when playing music and lighting at the same time  (Music is played at 70% of 
  its highest volume); Work up to 8 hours when using lighting with maximum intensity and 
  16 hours with dim light. 
• The label is located on bottom of unit.
 
• Android user can download and install the app from emoi official website
  (http://www.emoi.com/support/) in order to enjoy a better user experience. 
 You can also search “emoi smart” APP in Google Play Store to download. 
 Apple smart phone user can download emoi smart APP from iTunes store.
APP
ON
滑动按钮调节灯光
重复播放
随机播放
avant la pluie
• Short press the hands free button to answer the call.
• Long press the hands free button to reject the call, a beep will prompt.
• If your want to end the talk during the call, short press the hands free button, a beep will 
  prompt.
Hands free calling
• Press the lighting button for 1.5 seconds or shake the lamp for the first time to get soft 
  light with low intensity.
• Short press the lighting button or shake the lamp for the second time to increase the 
  light intensity.
• Short press the lighting button or shake the lamp for the third time to turn off light.
Normal light
• When the lamp is turned off, long press the lighting button for 3 seconds to enter color
  -light mode, the light will be red. Or you can press the button for 1.5 seconds to enter 
  color-light mode when the white light is on.
• Short press the lighting button or shake the lamp slightly to change the light color. 
  The alternative light color is red, orange, yellow, green, blue, purple and flashing color 
   light. (flashing with the above 6 colors in turn)
• Long press the lighting button for 1 second to quit color-light mode.
Color light
Safety Information
Safety Instruction
• Please read and follow these instructions, beware all warnings, and keep this document 
  for future reference.
• Set up your product in accordance with product manual, and place your product in a 
  stable location so it will not fall and cause product damage or bodily harm.
• Do not use your product near water, including dripping or splashing sources (e.g. indoor 
  fountain), or near object filled with liquids, such as flower vase or fish tanks.
• Do not use your product near heat sources (e.g. radiators, heat registers, stoves, open 
  flame, such as lighted candles, or other heat-producing devices, such as audio amplifiers 
  or TVs).
• Do not hold the speaker for a long time after shaking or tapping it, which may affect the 
  speaker cooling itself.
• Refer all servicing and repair to qualified service personnel. Servicing is required when 
  your product dose not operates normally, the power cord/plug has been damaged, the 
  product has been exposed to water, rain, liquid or moisture, the product has been 
  dropped, or an object has been inserted into a product port or vent.
• Please use the product in specified voltage, or it may cause electric shock, damage or 
  fire.
• Place the product in a proper place to avoid injury to children.
• Please do not disassemble and make any modifications to the product, this may lead to 
  electric shock, fire or electric leakage.
• The sensitivity of shaking/tapping function is determined by shaking/tapping speed, 
  force and direction. Please hold the speaker firmly and shake or tap slightly. Do not 
  shake it forcefully. If you have difficulty in controlling light with this function, please 
  switch off this function and use lighting button to turn on/off the light.
• Use the product in an environment within the temperature of 0 C ~ 40 C.
• This is not toy, children under 8 are forbidden to use.
Components and Accessories
• Lamp speaker x1               • USB cable x1 
ON
OFF
Reset button
Shaking/Tapping function 
on/off switch
Speaker power button
Play/Pause/Hand-free/Stop alarm
Lighting button/ Brightness adjusting/ 
Color-changing button
Short press: raise volume/Longer 
press: next song
Short press: lower volume/ Longer 
press: previous song
Illustration
Bottom
Mic
Speaker net
Mode indicator
Power indicator
Micro USB charging jack
Back
• Please make sure that the smart lamp speaker is fully charged before first use.
• Connect the USB cable with the product and power supply for charging (choice of power 
  from USB or connect with AC adapter to power from AC supply).
• The indicator will flash with white when charging. The first indicator lighting means the 
  battery is charged to 0-25% of its full capacity. The second indicator lighting, 25%-50% 
  battery capacity is charged. The third indicator lighting, 50%-75% battery capacity is 
  charged. The fourth indicator lighting, battery is fully charged.
• When in use (no charging), the first indicator lighting means 0-25% of the battery 
  capacity remains. The second indicator lighting, 25%-50% of battery capacity remains. 
  The third indicator lighting, 50%-75% of battery capacity remains. The fourth indicator 
  lighting, the battery is full.
Charging
• Play music from Bluetooth enabled devices, like smart phones, computer and etc.
• Press and hold the power button for 2 seconds to turn on the unit and enter Bluetooth 
  mode, indicator flashing with white light.
• Search “emoi Portable Lamp Speaker” on your devices’ Bluetooth list, and select it to 
  pair with the speaker. When paired successfully, there is a sound prompt and the mode 
  indicator will stay white.
• After paired, please select and play songs from the Bluetooth enabled device, any 
  songs of your choice.
Play music
Mode indicator
• Do not clean when the product is charging, clean with soft and dry cloth.
• Do not use solvents, chemicals or sprays.
• Do not allow liquids to spill or objects to drop into any openings.
Cleaning
Caution electric shock/fire hazard! The battery shall not be exposed to excessive heat 
such as sunshine, fire or the like.
Power Supply Warning
Danger of explosion if battery is incorrectly replaced. Replace only with the same or 
equivalent type. 
Caution
• There will be a risk of explosion if the battery is changed improperly.
• Change the battery with the same type or same capacity.
• Battery or battery unit should not be exposed to sunshine, open fire or store in other 
  over heated places.
China 3C Caution
If the product use a non-serviceable, rechargeable battery, which should last the 
duration of a product’s warranty period under normal use. Please do not attempt to 
change the battery yourself. If the battery has died, you should follow the disposal 
instructions in the documentation that accompanies your product. Also consult local 
laws and regulations for the proper disposal of batteries and electronic devices in your 
region. If there are no local regulations concerning electronic waste disposal, place 
your product (and its battery) in a waste bin for electronic devices.
Caution: There is a risk of explosion, fire or chemical burns if battery is replaced by an 
incorrect type, mutilated, or exposed to conducting materials, liquid, fire or heat (54 C 
or 130 F). Do not use or recharge a damaged rechargeable battery. Do no use or 
charge a battery if it appears to be leaking, discolored, deformed or in any way 
abnormal. Do not leave a battery discharged or unused for extended periods of time. 
Do not mix battery types. When a battery is misused, it may explode or leak, causing 
burns and personal injury. If a battery leaks, use normal precaution and discard it 
immediately following the local laws and regulations in your area. Keep all batteries 
out of the reachof children.
Battery information and disposal guidelines at product end of life
other antenna or transmitter. 
Changes or