AMS DIFFUSION CB710 User Manual
EN-4
Display Selector (DISP)
This unit can display either the clock time
or radio frequency/ CD player functions.
Ordinarily, the radio frequency or CD
player track indication is displayed, but the
unit will display the time when the DISP
button is pressed. The time will display for
approximately 5 seconds then return to the
radio/CD player function display.
— — — — — — — — — — — — — — — — — — ——
— — — — — — — — — — — — — — — — — — ——
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock, perform the following steps:
1. Turn the vehicle ignition and radio on.
2. Press the DISP button to view the clock.
3. With the clock visible on the display, press
and hold the DISP button until the time
display flashes.
4. Within 5 seconds, rotate the VOL knob
counter clockwise to adjust the minutes to
the desired setting. To change the hour,
rotate the VOL knob clockwise to adjust the
hour to the desired time.
5. Press DISP button to confirm and exit clock
setting.
General Operation
Power On/Off Button
Press the PWR button to turn the unit on when
the vehicle ignition switch is on. Long press to
turn the unit off.
— — — — — — — — — — — — — — — — — — ——
— — — — — — — — — — — — — — — — — — ——
Adjust Volume level
Rotate the VOL knob to adjust volume
level. Rotate it clockwise to increase and
anticlockwise to decrease the volume.
— — — — — — — — — — — — — — — — — — ——
— — — — — — — — — — — — — — — — — — ——
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB(when
USB connected), SD/MMC card(when card
inserted), AUX play , BT audio.
— — — — — — — — — — — — — — — — — — ——
— — — — — — — — — — — — — — — — — — ——
Disc Load/Eject
Load: Press to flip down the panel. Insert
the disc into the slot .
Eject: Press to flip down the panel. Press
to eject the disc .
— — — — — — — — — — — — — — — — — — ——
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface.
2. Press the SRC button to select Aux-In
mode.
3. Press SRC again to cancel Aux-In mode
and go to the next mode.
Radio Operation
Band Switch
During radio play, press the BAND button to
choose between three FM, two MW and LW
bands. The indication “MW”, “FM” or “LW“
appears on the display panel according to
your selection.
— — — — — — — — — — — — — — — — — — ——
TUNE
MANU SEEK: Press or to tune step by
step.
AUTO SEEK: Press or more than 2
seconds to seek automatically.
— — — — — — — — — — — — — — — — — — ——
Store Station Manually
Press button 1 - 6 more than 2 seconds to
store current station.
Press 1-6 briefly to recall preset station.
— — — — — — — — — — — — — — — — — — ——
Store Station Automatically
Press AMS button more than 2 seconds to
seek and save the 10 strongest stations in
current band automatically.
Press AMS button briefly to intro play the
preset stations.
9482CMB747NA338A说明书-1-EN.indd 4
2014-10-28 13:44:30