Schneider Electric Industries SAS 01-EM43 User Manual
HRB1684301-02
7
Chapter 2 Hardware reference
This section supplements the meter’s installation sheet and provides additional
information about the meter’s physical characteristics and capabilities.
information about the meter’s physical characteristics and capabilities.
Related topics
•
See the installation sheet that came with your product for detailed mounting
and wiring instructions (or download a copy at www.schneider-electric.com).
and wiring instructions (or download a copy at www.schneider-electric.com).
•
See your product’s technical datasheet at www.schneider-electric.com for
the most current and complete specifications.
the most current and complete specifications.
EM43xx meter details
***COPY FROM THE INSTALL SHEET THE DESCRIPTION SECTION,
INCLUDING GRAPHICS***
=> describe the Rogowski coil - how to install and notes like “install on insulated
cable only”, “keep coil perpendicular (90 degrees) to the current carrying
conductor”, “do not bend or pinch”, “when securing the current sensor, make
sure it clicks into the locking clasp”.
=> describe the voltage connections, describing the tool needed, torque
=> call out the antenna location and add note not to block it
=> identify the reed switch in the drawing, then cross-reference it to the
“Resetting the meter” chapter.
***COPY FROM THE INSTALL SHEET THE DESCRIPTION SECTION,
INCLUDING GRAPHICS***
=> describe the Rogowski coil - how to install and notes like “install on insulated
cable only”, “keep coil perpendicular (90 degrees) to the current carrying
conductor”, “do not bend or pinch”, “when securing the current sensor, make
sure it clicks into the locking clasp”.
=> describe the voltage connections, describing the tool needed, torque
=> call out the antenna location and add note not to block it
=> identify the reed switch in the drawing, then cross-reference it to the
“Resetting the meter” chapter.
LED indicator
The LED indicator alerts or informs you of metering and communications
activity. It blinks red and/or green depending on the status of the device.
activity. It blinks red and/or green depending on the status of the device.
***add callout pointing to the LED location
Specifications
The information contained in this section is subject to change without notice.
Current inputs
•
Rated current
– EM4302: 200 A
– EM4305: 500 A
– EM4310: 1000 A
– EM4320: 2000 A
•
Active energy accuracy: 1%
•
Measured current: 2 to 120% of rated current
•
Current sensor maximum temperature: 65 °C (149 °F)
DRAFT
COPY
ONLY
FOR
UL