Shenzhen Kingamei Technology Co. Ltd. YM-006 User Manual
4. How to use?
A. Paring
1).Turn on the shutter by switching the ON/OFF button, the shutter will enter
into paring mode and indicator LED starts flash quickly at the same time.
2). Activate the Bluetooth function on your phone and sourcing the device
around.
3). Select the device of "Shutter" from the list and paring will be finished
automatically in few seconds.
B. Select APP
Use inbuilt camera APP to taking the photos via "Shutter" or you can download
the APP "Camera 360" from APP Store if inbuilt camera cannot be supported,
check the compatible device and APP in following instruction.
C. Shooting
Select a correct APP and press the proper button on the shutter for iOS and
Android phones to taking the photos.
1).Turn on the shutter by switching the ON/OFF button, the shutter will enter
into paring mode and indicator LED starts flash quickly at the same time.
2). Activate the Bluetooth function on your phone and sourcing the device
around.
3). Select the device of "Shutter" from the list and paring will be finished
automatically in few seconds.
B. Select APP
Use inbuilt camera APP to taking the photos via "Shutter" or you can download
the APP "Camera 360" from APP Store if inbuilt camera cannot be supported,
check the compatible device and APP in following instruction.
C. Shooting
Select a correct APP and press the proper button on the shutter for iOS and
Android phones to taking the photos.
Instruction of bluetooth monopod :
•
Press the power button,LED light flashes;
•
After switch on,then press the Bluetooth pairing button until the LED
flash slowly, this means it is in bluetooth searching or pairing ;
•
Use mobile phone for pairing, when it is successful, the LED will
extinguish;
•
Press the corresponding key for mobile phone system configuration,
LED will be flashed after the configuration is completed, then it can be
used normally;
used normally;
•
It will enter into the sleep mode automatically without using for 5
minutes.Please press the power button to turn off the self-timer, to ensure
the battery can be used for a long time;
the battery can be used for a long time;
•
use PC device or mobile phone power adapter to charge the product,
charging LED long bright, saturated LED will extinguish.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.