Otodata Wireless Network Inc. C003 User Manual
CONFIDENTIAL & PROPRIETARY
C003 v.0r1
Alarm panel
interface
radio communicator
The C003 Alarm panel interface radio communicator is a transceiver that is used primarily for
the communication of identification, control and management information from residential and
commercial alarm systems using RF (radio frequencies).
the communication of identification, control and management information from residential and
commercial alarm systems using RF (radio frequencies).
System description.
The C003 system has been developed with the goal of providing the following services.
Data transfer, logging and Telemetry
Full and Partial alarm CID reporting
The use of the C003 enables wireless data collection and reporting of CID alarm panel messages. This
monitoring and control is done according to schedules and specific conditions that have been previously
established.
monitoring and control is done according to schedules and specific conditions that have been previously
established.
The C003 was developed in order to minimize the use of space inside standard alarm panel enclosures.
One of the main criteria for the development was also reduced operating cost. This is achieved by virtue
of the fact that energy consumption is kept to a minimum by maximizing overall system efficiency.
One of the main criteria for the development was also reduced operating cost. This is achieved by virtue
of the fact that energy consumption is kept to a minimum by maximizing overall system efficiency.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Please note: The minimum separation distance between the device's antenna and all persons during normal operation is 25 centimeters.
Warning: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Do not
attempt to tamper or make any changes to this device.
Le présent appareil est conforme
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Please note: The minimum separation distance between the device's antenna and all persons during normal operation is 25 centimeters.
Warning: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Do not
attempt to tamper or make any changes to this device.
Le présent appareil est conforme
aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
SPRS Ready
Self-contained
Highly robust communication
protocol
protocol
USER MANUAL