Fujitsu TX200 S6 VFY:T2006SF010DE/R Data Sheet

Data Sheet

 Fujitsu PRIMERGY TX200 S6 Server 

Page 4 / 9

http://ts.fujitsu.com/Primergy

Memory Modules Independent Mode

2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM

Memory Modules Mirrored Mode

4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM

Memory Modules Spare or Performance 
Mode

6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM

Interfaces

USB ports

10 x USB 2.0 (3x front USB, 4x rear USB 3x internal for backup, USSD and internal USB)

Graphics (15-pin)

1 x VGA

Serial 1 (9-pin)

1 x serial RS-232-C (9 pin), usable for iRMC S2 or System or common use

Serial 2 (9-pin)

1 x serial RS-232-C (9 pin), optional - occupies an unused slot

LAN / Ethernet (RJ-45)

1 x Gbit/s Ethernet (Intel Hartwell)

Service LAN (RJ45)

Service LAN traffic can be switched to shared onboard Gbit LAN port
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 

Onboard or integrated Controller

SATA Controller

ICH10R, 6-port SATA (4x for internal hard disks, 2x for accessible drives)

SATA controller type notes

On board SATA controller supports RAID levels 0, 1, 10

Remote Management Controller

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 2.0 x4 (mech. x8)

2 x Full height (1x long, 1x short)

PCI-Express 2.0 x8

2 x Full height (1 slot is notched. It is therefore also usable for x16 cards operating in x8 mode).

PCI-Express x4 (mech. x8)

1 x Full height 

PCI-slots

1 x 

Slot Notes

PCI slot: 32-bit / 33 MHz, 5 V; in SAS-configurations 1x PCI-Express slot is occupied by the modular RAID-Controller

Drive bays

Hard disk bay configuration

4x 3.5-inch, for SAS / SATA or 8x 2.5-inch for SAS/SATA optional

Accessible drive bays

3 x 5.25/1.6-inch

Notes accessible drives

All possible options described in relevant system configurator.

Optional hard disk bays

2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x 5.25-inch bays) 

Fan Configuration

Fan configuration

2 standard fans or 2 redundant fans (only available in combination with hot plug redundant power supply)

Operating panel

Operating buttons

On/off switch
NMI button
Reset button