Hangzhou Hikvision Digital Technology Co. Ltd. MP7608HN User Manual
Mobile Network Video Recorder User Manual
22
2.7.2 Alarm Output Connection
Follow the figure bellow to wire alarm output.
n and n# are a pair of alarm output. You can connect them with a relay alarm device. When
the voltage of connected alarm device exceeds the valid alarm output range, you need to
connect a relay to protect alarm output.
the voltage of connected alarm device exceeds the valid alarm output range, you need to
connect a relay to protect alarm output.
Relay
Output
n
n#
Load
GND Power
Output
JQC-3FG
Relay
(10 A/250 VAC)
~ 220 VAC
Neutral
Live
Relay
Output
n#
n
Alarm Powered by Direct Current
Alarm Powered by Alternating Current
Figure 2-21 Alarm Output Connection
2.8 Sensor-in Wiring
Step 1 Connect the delivered extension cable to I/O interface.
Step 2 Connect the automobile braking, reversing, left-turn, and right-turn signals to sensor-in
interface.
IO
Braking
Reversing
1
2
15
16
Left-turn Right-turn
Figure 2-22 Sensor-in Wiring
2.9 Power-on
Turn on the power supply after all the above installations are finished.