RV LIGHTING INC. MODEL-NO-WS-01 User Manual
5
8. Using Remote
Please pull out the battery insulating tape before using. The
remote controller use CR2032 cell battery, it can last for 2
years for regular usage. For proper receiving remote signal,
please do not install the controller in closed metal parts.
remote controller use CR2032 cell battery, it can last for 2
years for regular usage. For proper receiving remote signal,
please do not install the controller in closed metal parts.
9. Pairing New Remote
The remote and main unit is 1 to 1 paired as default. Further
more
more
, one main unit can be paired to 5 remote controllers
and every remote can be paired to any main unit.
Please do following steps to pair a new remote:
1. Plug off the power of main unit and plug in again after
more than 5 seconds.
2. Press remote ‘on/off’ and ‘decreasing brightness’ key
together in 5 seconds after main unit powered on.
After this operation, the controller’s indicator will flash white
for 3 times to display the new remote is accepted. The latest
paired 5 remote controllers can be recognized.
Please do following steps to pair a new remote:
1. Plug off the power of main unit and plug in again after
more than 5 seconds.
2. Press remote ‘on/off’ and ‘decreasing brightness’ key
together in 5 seconds after main unit powered on.
After this operation, the controller’s indicator will flash white
for 3 times to display the new remote is accepted. The latest
paired 5 remote controllers can be recognized.
6
Advanced Features
11. Waterproof
R217 model is standard version which can be used in dry
environment. R217-S is a IP68 waterproof version, which can
be used in wet environment or under water within depth of
30 meters.
Note: The remote receiving sensitivity will decrease when
controller installed in wet place or under water, please setup
the controller when the main unit is dry.
environment. R217-S is a IP68 waterproof version, which can
be used in wet environment or under water within depth of
30 meters.
Note: The remote receiving sensitivity will decrease when
controller installed in wet place or under water, please setup
the controller when the main unit is dry.
12. Protection
R217 series led dimmer has full protection function for
output short circuit, overload, and overheat. The indicator will
flash red at overload or short circuit protection and flash
yellow at over heat. The controller will automatically recover
from protection when working status is good.
Please ensure the LED load is in rated range, not shorted
and the controller unit is in a good heat dissipation
environment to avoid protection.
output short circuit, overload, and overheat. The indicator will
flash red at overload or short circuit protection and flash
yellow at over heat. The controller will automatically recover
from protection when working status is good.
Please ensure the LED load is in rated range, not shorted
and the controller unit is in a good heat dissipation
environment to avoid protection.
10. Optional Wall Switch Remote
The controller can also work with the optional wall switch
type remote controller RM07. This remote controller has the
same function and usage as the default hand hold remote
controller. It can be sticked on the wall for fixed place
operation.
type remote controller RM07. This remote controller has the
same function and usage as the default hand hold remote
controller. It can be sticked on the wall for fixed place
operation.
Specification
Model
R217
R217-S
Brightness Grade
7 levels
PWM Grade
256 levels
Min. Brightness Shortcut
Yes
On/off status memorize
Yes
Overload protection
Yes
Overheat protection
Yes
Working Voltage
DC 5-24V
Remote frequency
433.92MHz
Remote control distance
>15m at open area
Rated Output Current
15A
IP Grade
IP-63
IP-68