SensingTek Co. Ltd. 10SDS1100 User Manual
5. Accessories
• One CR123A battery
• Two screws
• Two plastic wall plugs
• Two plastic wall plugs
6. System Required
• iOS - iOS 8.0 and above Ready devices.
• Android - Android 4.3 above Ready devices
• Android - Android 4.3 above Ready devices
7.
•
Before starting to use Dexatek Smart Smoke Sensor, please make sure you
haveΣCentral/Smart gateway and ΣCasa App installed. If you don’t have
ΣCasa App onyour smart phone, please download from Google Play for
Android phone or Applestore for iPhone.
ΣCasa App onyour smart phone, please download from Google Play for
Android phone or Applestore for iPhone.
•
Installing your Smart Smoke Sensor
(1) At the place where you are going to install your Smart Smoke Sensor, draw a
horizontalline six inches long
(2) Remove the mounting bracket from your unit by rotating it counterclockwise
(3) Place the bracket so that the two longest hold slots are aligned on the line. In each
(3) Place the bracket so that the two longest hold slots are aligned on the line. In each
ofkeyhole slots, drawing a mark to locate a mounting plug and screw
(4) Remove the bracket
(5) Using a 3/16-inch (5mm) drill bit, drills two holes at the marks and insert plastic
(5) Using a 3/16-inch (5mm) drill bit, drills two holes at the marks and insert plastic
wallplugs. Put the Smart Smoke Sensor away from plastic dust on it when you drill
holds formounting
holds formounting
(6) Using the two screws and plastic wall plugs (all supplied), attach the bracket to the
wall
(7) Line up the slot of the bracket and the Smart Smoke Sensor. Push the sensor onto
themounting bracket on turn it clockwise to fix it into the place. Pull onward on the
SmartSmoke Sensor to make sure it is securely attached to the mounting bracket
themounting bracket on turn it clockwise to fix it into the place. Pull onward on the
SmartSmoke Sensor to make sure it is securely attached to the mounting bracket