VoxMicro LTD. AEH-AR9462 User Manual

Advanced Status Information

Click the

Advanced

button on the Current Status tab of the Atheros Client Utility to see

advanced information about the program and its operations. The Current Status tab does
not require any configuration. The following table describes the items found on the
Advanced Status screen.

Network Name (SSID)

Displays the wireless network name.
Configure the network name on the General tab.

Server Based

Authentication

Shows whether server based authentication is used.

Data Encryption

Displays the encryption type the driver is using. Configure the
encryption type on the Security tab.

Authentication Type

Displays the authentication mode.
Configure the authentication mode on the General tab.

Message Integrity

Check

Shows whether MIC is enabled. MIC prevents bit-flip attacks on
encrypted packets.

Associated AP Name

Displays the name of the access point the wireless adapter is
associated to.

Associated AP IP

Address

Shows the IP address of the access point the wireless adapter is
associated to.

Associated AP MAC

Address

Displays the MAC address of the access point the wireless
adapter is associated to.

Power Save Mode

Shows the power save mode. Power management is disabled in
ad hoc mode.
Configure the power save mode on the Advanced tab.

Current Power Level

Displays the

transmit power level

rate in mW.

Current Signal Strength

Shows the current signal strength in dBm.

Current Noise Level

Displays the current noise level in dBm.

Up Time

Shows how long the client adapter has been receiving power (in
hours:minutes:seconds). If the adapter runs for more than 24
hours, the display shows in days:hours:minutes:seconds.

802.11b Preamble

Displays the 802.11b preamble format.
Configure the preamble format on the Advanced tab.

Current Receive Rate

Shows the current receive rate in Mbps.

Current Transmit Rate

Displays the current transmit rate in Mbps.

Channel

Shows the currently connected channel.