NuTone QTXEN050 Leaflet

Page of 2
Broan-NuTone LLC    Hartford, Wisconsin    www.nutone.com    888-336-3948
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Architectural & Engineering Specifications
December 2007
QTXEN Series
Fans
MODELS QTXEN050,
QTXEN080, QTXEN110, QTXEN150
ARCHITECT’S SPECIFICATION
•  Ceiling Ventilator  shall be NuTone Model QTXEN050 (QTXEN080) 
(QTXEN110) (QTXEN150).
•  Ceiling Ventilator shall have corrosion resistant galvanized steel 
housing with four-point mounting capability. It shall be ducted to 
a roof or wall cap using 6” round ductwork.
•  Blower  assembly  shall  be  removable,  have  a  centrifugal-type 
blower wheel and a permanently lubricated motor designed for 
continuous  operation  and  mounted  with  resilient  anti-vibration 
mounts.
•  Non-metallic damper/duct connector shall be included.
•  Air delivery shall be no less than 50 (80) (110) (150) CFM and 
sound level no greater than <0.3 (0.3) (0.7) (1.4) Sones. All air 
and sound ratings shall be certified by HVI.
•  Ceiling ventilator shall be Energy Star® qualified and have an 
energy efficient permanent split capacitor motor.
•  Ceiling Ventilator shall be U.L. Listed for use over bathtubs and 
showers when connected to a GFCI protected branch circuit.
 
70M 
99044086A
DESCRIPTION
BLOWER:
•  Plug-in, permanently lubricated motor - engineered for 
continuous operation
•  Dynamically balanced centrifugal blower wheel for quiet, 
efficient performance
•  Maintains a high percentage of rated CFM in less than ideal 
installations
•  Low RPM for quiet operation
•  Resilient anti-vibration motor mounts
HOUSING:
•  Rugged, 26 gauge, galvanized steel construction
•  6” round ducting for superior performance
•  Polymeric duct connector with tapered sleeve and no metallic 
clatter
•  7-5/8” height allows for 2” x 8” (nominal) joist installations
•  Sturdy, easy, four-point mounting directly to joist
•  Includes unique spacer (patent pending) for mounting to 
engineered “I” joists
•  Includes hanger bars to position housing anywhere between 
16” to 24”-on-center joists
•  Two sets of mounting holes for hanger bars allow flush 
installation with bottom or top of drywall
•  Can be mounted in ceilings up to 12/12 pitch
GRILLE:
•  Polymeric construction
•  Innovative design - the result of extensive research with 
designers and consumers
CONTROLS (Purchase separately):
•  Refer to NuTone’s catalog for a complete line of accessories 
to effectively adapt these fans to your construction 
requirements.
U.L. Listed for use over bathtubs and showers when connected 
to a GFCI protected branch circuit (ceiling mount only).
3-Year Warranty
INSTALLATION
Complete installation instructions are included with each Fan.