Yantai Hengtai Electronics Co. Ltd. RX User Manual
Manual for Wireless receiving and calling system
Singcall Receiver
1:[FUN] 2:[[ESC]] 3:[[ENT]]
1 2 3 4 5 6 4:[DOWN] 5:[[MOVE]] 6:
[UP]
Operating Instructions
●
call button registering:
1) Standby mode, press key [FUN] 3 seconds till[F1] appears on the screen.
2) Press key [ENT], [01] [001] or [001-01] appears
3) Press key [UP], [[MOVE]] or [DOWN] to choose the register number wanted.
4) Press the call button to be registered, the register number flashes on the
2) Press key [ENT], [01] [001] or [001-01] appears
3) Press key [UP], [[MOVE]] or [DOWN] to choose the register number wanted.
4) Press the call button to be registered, the register number flashes on the
screen with music prompt and then stops.
5) Press key [ESC], and [F1] appears.
6) Press key [ESC] again, back to standby mode. The registration is finished.
7) Repeat step 3)~4)to register all the call buttons you need, and then press
6) Press key [ESC] again, back to standby mode. The registration is finished.
7) Repeat step 3)~4)to register all the call buttons you need, and then press
key [ESC] twice back to standby mode. Done.
●
prompt music setting
1) standby mode , press key [FUN] 3 seconds till[F1] appears on the screen.
2) Use key [UP] to choose [F2].
3) Press key [ENT] and [01] appears.
4) Use the key [UP], [DOWN] to choose prompt music (12 pieces of beautiful
2) Use key [UP] to choose [F2].
3) Press key [ENT] and [01] appears.
4) Use the key [UP], [DOWN] to choose prompt music (12 pieces of beautiful
music totally).
5) Press key [ENT], and [F2] appears
6) Press key [ESC] again and back to standby mode. Prompt setting is done.
6) Press key [ESC] again and back to standby mode. Prompt setting is done.
●
display time setting for the call button numbers.
1) standby mode, press key [FUN] 3 seconds till[F1] appears on the screen.
2) Use key [UP] to choose [F3].
3) Press key [ENT], and [20] appears on the screen.
4) Use key [UP], [DOWN] to choose the display time wanted. [00] means
2) Use key [UP] to choose [F3].
3) Press key [ENT], and [20] appears on the screen.
4) Use key [UP], [DOWN] to choose the display time wanted. [00] means