Shenzhen Front Electronics Co. Ltd. 2967 User Manual
Synchronization Instructions:
1. Turn ON the PS3 console.
2. Plug the receiver dongle into an available USB port on the PS3 console.
3. Press the "HOME" button on the Wireless Controller.
During synchronization, the LED on the receiver will flash quickly. If the channel LED and receiver
LED both glow solid, the wireless connection was successful. If synchronization was unsuccessful,
unplug the receiver dongle and repeat step 2.
LED both glow solid, the wireless connection was successful. If synchronization was unsuccessful,
unplug the receiver dongle and repeat step 2.
4. After the first successful connection, the Wireless Controller and the receiver dongle will
automatically connect when the controller is powered on or is awaken from sleep mode. Press
the "HOME" button to re-activate the connection.
the "HOME" button to re-activate the connection.
LED indicator and Player Channel Mapping:
• Player 1: LED 1
• Player 2: LED 2
• Player 3: LED 3
• Player 4: LED 4
• Player 5: LED 4 + LED 1
• Player 6: LED 4 + LED 2
• Player 7: LED 4 + LED 3
Note: The Player Channel LED is also used to indicate low battery power. It will flash quickly and the
vibration will automatically be turned off to conserve battery power.
Light Button
• Press the LED Light button on the back of the controller to change the color of the glowing effect.
o
The glowing effect will change in the following sequence: Red Green Blue Purple
Baby Blue Yellow White Color Gradient OFF Red…
Standby (Power Saving) Mode
The Wireless Controller will automatically enter standby mode to conserve battery power when it
hasn’t been used for a period of time. Press the “HOME” button to re-activate the controller. The
controller will automatically sync after returning to active mode.
Troubleshooting
The Wireless Controller does not work.
If the Wireless Controller fails to operate, or operates incorrectly, follow the steps below before
seeking assistance.
• Make sure the PS3 is turned ON and the receiver dongle is inserted properly.
• Make sure the Wireless Controller is properly synchronized with the receiver dongle.
• Make sure the Wireless Controller is within the operating distance.
• Make sure the battery of the Wireless Controller is fully charged.