Kingletian International Electronic Co. Ltd K-3206I User Manual
User Manual
Model:K‐3206I
FCC ID:
FCC ID:
2AEAYK‐3206I
SELF CAMERA MONOPOD SPECIFICATION:
1. Bluetooth V3.0,low power consumption,highspeed without delay
2. Compatible with IOS and Android dual system
3. Automatic default system,no need to switch android or IOS
4. Do not need to install the APP
5. Distance:10M
6. Working frequency:2.4GHz,work mode:GFSK
7. Working current:1mA(primary dormancy 0.5mA)
8. Working voltage:3V to 4.2V
9. Working temperature:‐10~55 degrees
10. Work humidity:10%~70%
11. Battery:100mA Lithium batteries
IN THE BOX
1. Self camera monopod*1
2. User manual
3. Micro‐USB charging cable
4. Cellphone holder
My selftimer use methed:
1. Open:short press the power switch,LED lights up,after 1 second,the green LED lights down
2. Paired/online:
2.1 Press the camera key for 2 seconds,the green LED is flashing,the device is pairing mode
2.2 Open mobile phone search Bluetoothdevice,theBluetooth device is selftimer‐03
2.3 Click the selftimer‐03 link of Bluetoothdevices,wait for 8 seconds,when the green LED is
2.2 Open mobile phone search Bluetoothdevice,theBluetooth device is selftimer‐03
2.3 Click the selftimer‐03 link of Bluetoothdevices,wait for 8 seconds,when the green LED is
constant lighting,they are paring successful
3. Photos:light press the photo keys,photo is complete
4. Power off:press 3 seconds power key
5. Charging:The micro USB interface is at the bottom of the selftimer,when you charge it,and
4. Power off:press 3 seconds power key
5. Charging:The micro USB interface is at the bottom of the selftimer,when you charge it,and
the red LEDis lighting
Sleeping mode:
1. When the device is not used for 5 minutes,the device is sleeping mode,theBluetooth is
Sleeping mode:
1. When the device is not used for 5 minutes,the device is sleeping mode,theBluetooth is
disconnecting
2. Short press the camera key,the device cance the dormant,and connecting the phone
automatically
3. When the cellphone Bluetooth and the device is disconnecting,connectionagain,short
press the camerakey,the device is connecting automatically