JASKEY ELECTRONICS CO. LTD. CR899 User Manual

FEATURES
- OLED display; readable in strong sunlight
- Simple ‘Tapping’ operation 
- Tracks Steps, Distance and Calories Burned
- Monitors sleep quality; total sleep time and number of times you are awake 
- 14 Days Memory
- Set Step Target and progress tracking; with vibration alert when target is 
  achieved
- Vibration alarm and reminder alert
- Built in rechargeable battery 
- Low Battery Consumption; last more than 1 week
- Water resistant 
- Uses Bluetooth® 4.0 Smart Ready Technology; Wirelessly 
  uploads and store data to iOS and Android (OS 4.3+) mobile devices

Please read instructions thoroughly before use.

1. Getting to know your unit

USB Protective
cover

Wristband

OLED 

 

Display

Mobile device requirements

The Activity Tracker is capable of setting up and syncing with select mobile 
devices that support Bluetooth V4.0 technology.

For Android devices, it requires android version 4.3 and above.

Android Device Installation:
    - Scan this QR code or go to 
      google play store and download and
      install the app:
      ‘TrakFit’. 

IOS Device Installation:
     - Scan this QR code or download the 
       app “TrakFit” from app store and install 
       to your mobile device.

If you already have the app installed, check if update is available.  
Make sure you have the latest version on your device.

a. Charging
Plug one end of the USB cable to the activity tracker and the other end to an 
USB powered port or computer to start charging.
The  ‘Battery Full’ icon will show on the display when the battery is fully 
charged.  

Note:
First time charging - please charge the unit for at least 2 hours.

 

IMPORTANT:
The Activity Tracker must be paired directly from the “TrakFit” app and not 
under the Bluetooth Setting mode on your ios or android device.

Initial Setup
a. Open the “TrakFit” app.
b. Follow the on screen instructions - it will automatically guide you to input 
    your personal details and pair the the device to the app.
    If the setup procedure was unsuccessful, you can attempt the setup  
    manually.  Simply follow the instructions below: 

c. Touch the ‘        ’ icon on the top left hand corner and choose ‘               ‘  to 
    input your personal data.
d. Touch the ‘< ‘ icon on the top left hand corner to exit ‘Profile’ screen.
e. Select ‘Device’. 
f.  Touch the Bluetooth icon ‘            ‘ to scan for nearby devices.
g. Select device ‘U-Trak LIVE’ and follow the on screen instructions. 
h. Upon successful pairing, it will automatically exit the pairing screen and 
    start data synchronization.
    If it doesn’t automatically exit the pairing screen, touch the ‘<’ icon on the top
    left hand corner to exit pairing screen.  Touch ‘HOME’ icon to go to the home
    screen.  Touch the sync button ‘         ‘ to start syncing the data between the 
    Tracker and Mobile device.

Note: Make sure the Tracker is in Activity Mode for the data synchronization.  
          The Tracker cannot sync data under Sleep Mode.  

Normal pairing
If the Tracker becomes unpaired, you can follow the instructions 
below to pair the device to the app again.

a. Open the ‘TrakFit’ app.
b. Touch the ‘         ’ icon on the top left hand corner and choose ‘Device’.

c. Touch the ‘-’ sign to unpair the previous device.
d. Tap on the Bluetooth icon to start scanning for your Tracker
e. Select device ‘U-Trak LIVE’ for pairing.

   

Turn on the Bluetooth function on your mobile device before opening the app.

Your Activity Tracker is designed to be worn on your wrist or worn on your 
waist.  It comes with the accessory parts - wristband and belt clip holder.

a. Unit activation
Make sure the unit is fully charged. See section 2(a) for more details.
Pair the device to synchronize the correct date into the activity tracker. 
Otherwise the calendar date on your tracker will be incorrect.

b. Using the Tracker in wet conditions
The Tracker is splash proof only.  Make sure the rubber cover for the USB
port is properly inserted back into place to prevent water from going into
the USB charging port.

DO NOT USE DEVICE IN THE SHOWER OR UNDER HEAVY RAIN 
CONDITION. 

c. Viewing the display
To conserve the battery power, the OLED display will automatically turn off
when left idle for 6 seconds.

Simply ‘double tapping’ quickly on the screen of the tracker will activate 
the viewing display. It will show the default clock time screen.
To view other information from the tracker, slowly ‘tap’ the screen as many 
times as necessary until you see the data you require. 

d. Operation modes
There are 2 modes of operation:
- Activity mode
- Sleep monitoring mode

i) Activity Mode
Under Activity mode, the Tracker has the following functions

 

Charging

Fully Charged

- Clock time 
  with calendar

- Steps 

- Distance traveled

- Calories burned

- Goal progress

- Active Minutes

>

>

Belt
Clip

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC Rules.  These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful 

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

　

- Reorient or relocate the receiving antenna.

　

- Increase the separation between the equipment and receiver.

　

- Connect the equipment to an outlet on a circuit different from that to which the

This device complies with part 15 of the FCC rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that 

may cause undesired operation. 

    receiver is connected.