Bodycap 043 User Manual
18
V.01 21/08/2015
Figure 17b
:
Label of the
Activator
4 The Activator
The Activator (Fig. 8) is intended to activate the capsule Anipill before a measurement cycle.
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
4.1 Important information and safety instructions
The battery
The system does not include battery. For each use, the power supply of the Activator is
performed by mains supply or a PC / MAC switched on. The connexion between the
Activator and the main supply and/or the computer has to be done only with the cables and
the power supply provided by the manufacturer.
The system does not include battery. For each use, the power supply of the Activator is
performed by mains supply or a PC / MAC switched on. The connexion between the
Activator and the main supply and/or the computer has to be done only with the cables and
the power supply provided by the manufacturer.
Cleaning
If it is necessary to clean the Activator, please respect some rules. You can clean your
Activator with a damp cloth or a wipe to control the humidity. Nevertheless, it is essential to
pay attention to external connectors because they will be the most sensitive to humidity.
In any way, the system should not be introduced in an autoclave under penalty of
permanent damage.
Maintenance
It is strictly forbidden to open the activator. If a fault or malfunction is found, contact your
distributor or the manufacturer (details at the end of the user manual).
The label (Fig. 9)
The label contains the following symbols :
"Batch code"
"Catalogue reference"
"Manufacturer"
LOT
REF
Figure 17a : The activator