Olympus Winter & Ibe GmbH ESG200 User Manual

28

Product description and functional principles

The electrosurgical generator is equipped with a user friendly touch screen. The control 

buttons are activated by tapping the corresponding part on the screen with the fi nger tip.

The All Screen is the initial screen of the electrosurgical generator. The All Screen displays 

the current settings of the selected modes as well as the 3 buttons on the right-hand side for 

system settings.

Each pane covers all output socket related information as described below. Tap into the 

pane to switch to the corresponding Set Screen. On the Set Screen the mode and the output 

power levels for the corresponding output socket can be set.

As a default setting the cutting modes for the BIPOLAR socket are switched off, i.e. only the 

blue coagulation button is displayed in the BIPOLAR pane. It is impossible to access and 

activate any bipolar cutting mode.

 

• To switch on the bipolar cutting modes refer to the section “Bipolar Cut Setup” on page 

46.

DRAFT 

– 

2017-01-17