Olympus Winter & Ibe GmbH ESG200 User Manual

97

Appendix A

An alarm condition is indicated about one second after detection and securing.

The alarm system provides a log of occurrences of alarm conditions. The eldest 

log is overwritten by the latest log when the capacity of 4098 logs is reached. Only 

authorized service personnel can read log data.

If the alarm system is powered down, then the log is still maintained by an internal 

electrical power source. In case of a total loss of power, i.e. mains electricity as well 

as internal power source, the complete log is erased immediately.

Depending on the priority of an error, the alarm tones sound different.

E0004, E0008...E0011, E0013, E0015, E0018, E0024...E0037, E0039...E0102, 

E0116...E0119, E0122...E0133, E0137, E0142...E0178, E0197, E0198, E0203...

E0211, E0213, E0216...E0412, E0415...E0437, E0439, E0440, E0443...E0455, 

E0458...E0484, E0492...E0605, E0620...E0659, E0662...E0664, E0672...E0680, 

E0682, E0684...E0686, E0691, E0697

For these error codes the following values apply:

Duty cycle ....................................................Intermitting signal (number of burst = 10)

Frequency ................................................................................................. 200/300 Hz

Volume ...................................................................................................... ≥ 65 dB (A)

E0012, E0016, E0017, E0019...E0022, E0038, E0104, E0105, E0108, E0109, 

E0120, E0121, E0134, E0136, E0179...E0186, E0188...E0196, E0199...E0201, 

E0212, E0215, E0413, E0414, E0438, E0457, E0488, E0489, E0665, E0681

For these errors codes the following values apply:

Duty cycle ......................................................Intermitting signal (number of burst = 3)

Frequency ................................................................................................. 200/300 Hz

Volume ...................................................................................................... ≥ 65 dB (A)

E0001, E0002,  E0006, E0115, E0140, E0141, E0187, E0202, E0214, E0441, 

E0619, E0660, E0683, E0687...E0690, E0698

For these errors codes the following values apply:

Duty cycle ......................................................Intermitting signal (number of burst = 2)

Frequency ................................................................................................. 200/300 Hz

Volume ...................................................................................................... ≥ 65 dB (A)

DRAFT 

– 

2017-01-17