Advanced Warning Systems LLC AWS-SC User Manual
INSYTE PRODUCT OPERATION DESCRIPTIONS
Page 3 of 8
a) “
”: to change password;
b) “
”: to change the alarm sounds;
c) “
”: to check the battery usage;
d) “
”: to perform coupling between InSyte device and remote control
C: GENERAL Option Commands:
The option command key sequence “ # ”: We have to define the actions for this InSyte command key similar to these
keys on the remote control. In this first version, we ONLY use it for simple options to select the sensors. Note: All
Option commands are key sequence “ # ” followed by a “#” (numeric digit) and a “ ” to finish. So the option
commands are of the key sequence form “ # # ”: The last digit “#” has different meanings with a default value.
The definitions of general option commands are as follows:
a) “
# ”: to activate the Sensor Options: “1” - use both the Magnetic Reed Switch and the Omni
Directional Sensor; “2” - use the Magnetic Reed Switch ONLY; “3” - use the Omni Directional Sensor ONLY.
The default value is “1”.
b) “
# ”: to activate the Sound Options: “1” – to turn Keypad sound ON; “2” – to turn Keypad sound OFF;
“3” – to set the transducer volume to High level; “4” – to set the transducer volume to Low level. The default
value is “1”.
c) “
# ”: to activate the Voice Message Language Options: “1” – to select reminder messages in English;
“2” – to select reminder messages in Spanish; “3” – to set reminder messages OFF. The default value is “1”.
d) “
# ”: to set Sensitivity Options: There are FOUR levels of OMNI sensor sensitivities, “1” – very
sensitive; “2” –above normal sensitive; “3” –moderate sensitive; “4” – low sensitive.
Here are the Commands that user will perform under normal usage:
1) Arm: “
”
2) Disarm: “ #### ”
3) Change password: “
3) Change password: “
”
4) Change alarming sound: “
”
5) Check battery status: “
”
6) To couple with Remote control: “
”
7) Select sensor option: “
# ”
8) Turn keypad sound on/off, or adjust transducer sound level (High/Low): “
# ”
9) Select voice message language: “
# ”
10) Set sensor’s sensitivity: 4 levels: “
# ”
1.7. Overall View of the InSyte 1 Device
InSyte 1 Basic Operation & Functionality:
1) User interface uses “6-button Keypad” for device control:
a) Press “
” to arm the device