Panasonic TH-60PF30ER User Manual
60-inch Full High Definition Plasma Display
TH-60PF30ER
PMS06/30/2011
1/4
© Panasonic Corporation 2011
Product specification
(design and specification subject to change without notice)
LAN
RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link
On Mode Average Power Consumption
*3
■DISPLAY
Screen Size (Diagonal)
60-inch (1,526 mm)
Aspect ratio
16:9
Effective Display Area (WｘH )
1,330 x 748 mm
Number of pixels (HｘV)
1,920 x 1,080 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (HｘV)
0.693 x 0.693 mm
Contrast Ratio
5,000,000 :1
Gradation
6,144 steps (equivalent)
■CONNECTION TERMINAL
■CONTROL TERMINAL
VIDEO IN
BNC x 1
1.0 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set
0.5 V [rms]
COMPONENT/RGB IN
BNC x 3
Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set
0.5 V [rms]
HDMI IN
HDMI TYPE A connector x 1
DVI-D IN
DVI-D 24pin x 1
AUDIO IN
0.5 V [rms]
0.5 V [rms]
PC IN
MINI D-SUB 15pin x1 (Female)
Y/G : with sync 1.0 V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
HD/VD : 1.0~5.0 V [p-p] (high impedance)
AUDIO IN
SERIAL
D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C Compatible
■ELECTRICAL
Power Requirements
220-240 V AC, 50 Hz/60 Hz
Power Consumption
475 W
370 W
370 W
Power off condition
0.3 W
Stand-by condition
Save ON 0.5 W, Save OFF 0.8 W
■SOUND
Audio Output
6Ω, 16 W [8 W + 8 W] (10 % THD)
■MECHANICAL
Dimensions (W x H x D)
1,434 ×852 × 99 mm
Carton Dimensions (W x H x D)
1,607 × 1,102 × 332 mm
Weight
approx. 49.0kg
Gross weight
approx. 65.0 kg
Cabinet Color
Black
■ENVIRONMENTAL
Operating environment
Temperature:
0 ℃ to 40 ℃
Humidity :
20 % to 80 % (Non condensation)
Altitude :
0 to 2,800 m
Storage environment
Temperature:
-20 ℃ to 60 ℃
Humidity :
20 % to 90 % (Non condensation)
Altitude :
0 to 3,300 m
■STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS
EN60065, IEC60065, GOST
RADIATION REGULATIONS
EN55022 Class-B, EN55024, EN61000-3-2, EN61000-3-3
■REMOTE CONTROL TRANSMITTER
Power Requirements
DC 3 V (2 x R6 Size batteries)
Operation distance
approx. 7 m in front of plasma display
Weight
approx. 100 g including batteries
- AC power cord - Operating instruction book - CD-ROM (Operating instruction)
- Remote control transmitter - Batteries - Clamper x 1 - Ferrite core x 2
- Remote control transmitter - Batteries - Clamper x 1 - Ferrite core x 2
*3: Based on IEC 62087 Ed.2 measurement method.
INCLUDED ACCESSORIES
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
Compatible with HDCP 1.1
without sync 0.7 V [p-p] (75 Ω)
Panel Life
*1
approx. 100,000 hours
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Full HD 3D
Full HD 3D Ready
*2
3D shutter out
M3 jack x 1 (for 3D IR Transmitter)
DC 8V out for 3D IR Transmitter
Center Plus for EIAJ 4 mm Plug
Function Slot:SLOT 2.0
1 (Vacant)
M3 jack x 1 (Common use with PC)
M3 jack x 1 (Common use with DVI-D)