InVue F1671 User Manual

Samsung W1000
Stand with Quick Connect - DVW110
Quick Connect Sensor - DVW220/230
Custom Charge Head - DVW440

Remove the watch band from the 
watch body.

Align the sensor with the watch body 
as shown. Make sure that the tape 
on the sensor fits between the sensor 
and the watch body.

Use the pin removal tool to 
disengage the watch pin.

Select the watch band with the 
buckle.

Use the tool or a fingernail to depress 
the other pin and insert that side into 
the watch body.

With the sensor held in place against 
the watch body, reinsert the side of the 
watch band without the pin into the 
watch body.

Inspect the sensor to make sure 
that the tape on the sensor is intact 
and that the switch is in the down 
position.