Shenzhen Baicheng Innovation Technology Co. Ltd BCPTA User Manual
PLUTO TRIGGER
BAICHENG INNOVATIONS
27
capture only high level sound events, you need to set the sensitivity to a lower
value. You can try and see which sensitivity level fits your needs. The second
parameter is delay. The sound event may be captured too early. So, you need to
add some delay. The flash unit will be triggered after the delay you specified and
this will allow you to capture the picture at the exact moment.
value. You can try and see which sensitivity level fits your needs. The second
parameter is delay. The sound event may be captured too early. So, you need to
add some delay. The flash unit will be triggered after the delay you specified and
this will allow you to capture the picture at the exact moment.
5.3.
L
IGHT
M
ODE
Light mode is similar to sound mode, but use ambient light as the signal to trigger
the camera.
the camera.
Besides the Sensitivity and Delay parameters, Trigger Mode needs to be adjusted
before starting the trigger. Trigger mode has two options: “Trigger High” and
“Trigger Low”. “Trigger High” means taking photo when the light value is higher
than the set threshold (light condition), while “Trigger Low” means taking photo
when the light value is lower than the set threshold (dark condition).
before starting the trigger. Trigger mode has two options: “Trigger High” and
“Trigger Low”. “Trigger High” means taking photo when the light value is higher
than the set threshold (light condition), while “Trigger Low” means taking photo
when the light value is lower than the set threshold (dark condition).
5.4.
L
IGHTNING
M
ODE
Lightning mode is really helpful for photographers who want to take photo of
lightning strikes.
lightning strikes.
Since lightning strikes happen in a short period of time, about 100ms. Human
cannot act fast enough to capture the event manually. Normally, to take photo
of strikes, you will need to take a lot of long exposure photo and hope to have the
luck to capture a good one. This method is limited in two aspects: you take a lot
of useless photos and light condition should be dark enough. Pluto trigger
addresses this with lightning mode by using the embedded high-speed light
sensor and the fast processing program.
cannot act fast enough to capture the event manually. Normally, to take photo
of strikes, you will need to take a lot of long exposure photo and hope to have the
luck to capture a good one. This method is limited in two aspects: you take a lot
of useless photos and light condition should be dark enough. Pluto trigger
addresses this with lightning mode by using the embedded high-speed light
sensor and the fast processing program.
Only one parameter needs to be adjusted and that is sensitivity. You will need to
try and see which value fits the light condition.
try and see which value fits the light condition.
5.5.
PIR
MODE
PIR mode is for wildlife photographers. It detects the infrared emissions from the
body of animals and triggers your camera automatically.
body of animals and triggers your camera automatically.