SALUS North America Inc. AKL01PRF User Manual

AKL01PRF ZigBee Zone Pump Wiring Center 

Wiring Guide

Fuse: 5A slow blow, 5x15mm (2AG)

XX Active Pump

L

AC Line In
Zone Pump Line Out (max. 1/6 HP)

N

AC Neutral
Earth Ground

Technical Helpline 1-855-557-2587

• This product must be installed by qualified personnel and the installation must comply with the codes and regulations applicable to the

municipality where this product is installed. Failure to do so could lead to injury, death, or prosecution.

• Always disconnect the AC power before installing or working on AC power components.

Power

120 VAC power ON 

Zone 1  

 Zone pump active

Network

Status

Searching for 

network

Paired to a network

The  zone  pump  will  be  activated  when 

the thermostat calls for heat.
Auxiliary Output

XX:   Contact closure when zone pump is ON.
Factory Default

To  restore  the  wiring  center  to  Factory  Default, 

press  and  hold  the  Pair  button  until  the 

Network Status LED turns off (~10 secs).
Note:  Restoring  to  Factory  Default  will  remove 

the  wiring  center  from  the  network  and  delete 

all associated devices.

short=1, long=3

1

2
3
4
5
6
7
8
9