Axis 1650 Network Print Server UK 0214-003 Leaflet

©2007, Axis Communications AB. The Axis trademark is registered by Axis AB. All other company names and products are trademarks or registered
trademarks of their respective companies. We reserve the right to introduce modifications without notice.

29638/EN/R3/0707

Supported devices

Support for Canon printers and multifunctional products,
including support for the host-based printing methods
Canon Advanced Printing Technology (CAPT), Canon
Advanced Raster Printing System, UFRII LT and other printer
types, such as Canon BubbleJet
For more information, see list of supported devices on the
product support page at www.axis.com

Connectors

All standard Ethernet and Fast Ethernet networks: RJ-45
connector (Category 5 or 6, shielded twisted pair cable) for
10baseT or 100base TX Ethernet with full duplex
Supports:
- Ethernet II frame types
- NWay for auto-detection of network speed

Printer Connection

Parallel: 36-pin Centronics connector, high-speed IEEE 1284
compatible with ECP support and throughput of 1 MB/sec
USB: Support for low and full speed. Compatible with USB
2.0 printers

Front Panel

2 LED indicators: Power and Network
Test button for performing a factory default*

*When the AXIS 1650 is connected to e.g. BubbleJet devices, the test
button can also be used for information printouts.

Security

Password protected configuration
Option to disable protocols
TCP printing restriction
SLP restriction
SNMP restriction

Processors and
memory

Processor: AXIS ETRAX 100LX 32-bit 100 MHz RISC
Memory: 2 MB Flash, 8 MB RAM

Power

Power provided by external supply. Maximum 5.6 W (Type
PS-H Worldwide, 5.1 V DC 2000 mA)

Operating Conditions

Temperature: 40-105 °F (5-40 °C)
Humidity: 10-90% RH (non-condensing)

Supported languages

English and Japanese

Installation,
management and
maintenance

AXIS IP JumpStarter for IP setting
AXIS CAPT Print Monitor for printer installation, can be
used regardless of the printer type
AXIS ScanClient
Internal web pages or FTP for installation, configuration,
monitoring and firmware upgrading
SNMP-MIB II compliant (RFC 1213)
Canon MIB Ver2.50
Printer MIB (RFC1759)
HOST MIB (RFC1514)
PPM MIB

Supported systems

Microsoft Windows: 98*, Me*, 2000, XP Server, 2003*, and
Vista
Netware 5.1, 6.x

*Valid for print only

Minimum web
browsing requirements

Netscape Communicator 6.x or higher and MS Internet
Explorer 5.x or higher

Supported protocols

FTP, BOOTP, ARP, RARP, DHCP, ICMP, IGMP, IP, TCP, UDP,
HTTP, SLP v1/v2, SNMP v1, DNS, DDNS, WINS, SNTP

Supported print
protocols

LPD, RawTCP, 6.x NDPS and iPrint are supported by the use
of standard TCP/IP print protocol LPR

Included accessories

AXIS Installation CD with software for installation,
management and printing, including AXIS IP JumpStarter
and AXIS CAPT Print Monitor, AXIS ScanClient
Quick Installation Guide
USB cable
Network cable
Mounting clip
Power supply

Approvals

EMC: EN 55022:1998, EN 55024:1998, EN 61000-3-2,
EN 61000-3-3, VCCI Class B, C-TICK AS/NZS CISPR22,
ICES-003 Class B
Compliance to FCC part 15 Subpart B, Class B
Safety: EN 60950
Power supply: UL, EN60950

Dimensions (HxWxD)
and weight

2.9 x 6.2 x 11.7 (1.1“x 2.4“ x 4.6“)
80 g (0.18 lb)