F.A.S.T. GmbH AZBIDI User Manual
2. Adjusting the tablet and adding a new BIDI logger
If you have procured a BIDI logger set including tablet from us, the tablet already has a
basic set-up. In this case, please skip this step.
The following steps are to show you how to set up a tablet you did not procure from FAST
GmbH.
basic set-up. In this case, please skip this step.
The following steps are to show you how to set up a tablet you did not procure from FAST
GmbH.
NOTE:
The tablet needs to feature an Android operating system,
and an AZA-OAD App has to be installed from Google
Playstore!
Step 1: Adjusting the tablet
First, the Servicemaster device has to be connected with the tablet via Bluetooth. In order to
do so, please switch on den Servicemaster. Then start the AZA-OAD software on the
tablet. Please select in the main menu:
do so, please switch on den Servicemaster. Then start the AZA-OAD software on the
tablet. Please select in the main menu:
1.1)
Servicemaster,
1.2)
Connection,
1.3)
available devices,
1.4)
Search.
The tablet is now searching for appropriate Bluetooth connections. A list will be displayed in
the upper left corner to indicate the Bluetooth devices received. This list may also contain
smartphones or other devices. Please search for the code indicated on the
Servicemaster housing and enter this code (e.g. FAST SM-AB12).
the upper left corner to indicate the Bluetooth devices received. This list may also contain
smartphones or other devices. Please search for the code indicated on the
Servicemaster housing and enter this code (e.g. FAST SM-AB12).
1.5)
The tablet will request you after a short while to confirm the interconnection. If you
wish to confirm, please press OK. Under normal circumstances, this step does not
need to be repeated in the future. So when the program has been booted and the
Servicemaster device is switched on, the tablet will automatically be interconnected
with the Servicemaster from now on.
wish to confirm, please press OK. Under normal circumstances, this step does not
need to be repeated in the future. So when the program has been booted and the
Servicemaster device is switched on, the tablet will automatically be interconnected
with the Servicemaster from now on.
Step 2: Adding a new BIDI logger
If you wish to add a new BIDI logger, please select in the main menu:
2.1)
Settings,
2.2)
Program settings,
2.3)
Add loggers manually.
2.4)
Several loggers or just one logger can now be added in the window displayed. If you
wish to add several loggers, please enter the highest serial number and the lowest
serial number of the BIDI loggers delivered. The serial number is indicated on the
cap of each BIDI logger. As soon as the serial numbers have been entered, tap on
wish to add several loggers, please enter the highest serial number and the lowest
serial number of the BIDI loggers delivered. The serial number is indicated on the
cap of each BIDI logger. As soon as the serial numbers have been entered, tap on
2.5)
Apply. The additional BIDI loggers are now displayed in the main menu at
2.6)
Patrol.
The tablet has now been adjusted and can be applied.