Linksys Network Storage Link for USB 2.0 Disk Drives NSLU2 User Manual

4

Chapter 2: Getting to Know the Storage Link

The Storage Link’s ports and connectors are located on the back panel.

This LAN (Local Area Network) port connects to Ethernet network devices, such as 
a switch or router.

Insert your USB Flash Drive (USB key) or USB disk here. 

Connect your USB hard drive here. (Flash drives will not be recognized.)

This button has 2 functions: 

If the Network Storage Link's IP Address is lost, press and hold this button for two 
seconds. The IP Address will be set to the default value of 192.168.1.77 and it will 
beep once to indicate the reset has occurred.

If the Network Storage Link's password is lost, press and hold this button for 10 
seconds. The password will then be set to the default value of "admin", and the 
Network Storage Link will beep again. 

Connect the power adapter here.

 

Important: Resetting the Network Storage Link will erase all of your 

settings and replace them with the factory defaults. Do not reset the 

Network Storage Link if you want to retain the settings.